Bids Are Invited For Price Registration For Future And Possible Acquisition Of Various Electrical Materials, Intended For The Maintenance, Expansion And Modernization Of The Street Lighting Network, As Well As To Meet The Demands Of Electrical Installations In Public Buildings And Other Structures Under Responsibility Of The Municipality.
Bids Are Invited For Price Registration For Future And Possible Acquisition Of Various Electrical Materials, Intended For The Maintenance, Expansion And Modernization Of The Street Lighting Network, As Well As To Meet The Demands Of Electrical Installations In Public Buildings And Other Structures Under Responsibility Of The Municipality.
Arm For Public Lighting: Manufactured In Sae 1010/1020 Hot Galvanized Steel, In Accordance With Local Dealership Standards (Cpfl), Projection Of 3.00 Meters, Base For Fixing To The Pole With Shoe, External Diameter Of 48.3Mm, Minimum Tube Wall Thickness Of 1.50Mm. *, Circular Strap For Post: Diameter Of 130Mm Made Of Carbon Steel, Hot-Dip Galvanized. For Fixing Public Lighting Arms To Poles. With Screws For Fixing. ., Circular Strap For Pole: Diameter 150Mm. Made Of Carbon Steel, Hot-Dip Galvanized. For Attaching Public Lighting Arms To Poles. With Screws For Fixing., Circular Strap For Post: Diameter 180Mm. Made Of Carbon Steel, Circular Strap For Pole: Diameter Of 200 Mm. Made Of Carbon Steel, Hot-Dip Galvanized. For Fixing Public Lighting Arms On Poles With Screws For Fixing., Circular Strap For Pole: Diameter 230Mm. Made Of Carbon Steel, Circular Strap For Post: Diameter 250Mm. Made Of Carbon Steel, Circular Strap For Pole: 300Mm Diameter. Made Of Carbon Steel, Pre-Formed Strap: For 10Mm Cable. For Fixing Aluminum Cables To Pulleys., Pre-Formed Strap: For 16Mm Cable. 25Mm.For Fixing Aluminum Cables On Pulleys., Pre-Formed Handle: For 35Mm Cable.For Fixing Aluminum Cables On Pulleys., Presbow Frame With Porcelain Pulley Insulator: Vertical Press Brow Insulator Set For Post (Standard 3Mm 1 Pole). Pulley Insulator (72X72mm) Made Of Porcelain., Photocell Relay: Voltage: 220V~; Operating Frequency: 50/60Hz; Consumption: <1.5W; Brightness To Turn On: Less Than 20 Lux; Brightness To Switch Off: Less Than 80 Lux, Respecting The Hysteresis Relationship; Initial State Of Contacts: Normally Closed (Nf); Failure Mode: Fail On (Fl) /Fail-On; Operating Mode: Activates The Load During The Night And Turns It Off During The Day (Turns On At Night); Delay Rating: Al (Slow Start); Surge Voltage: 4000V/2000; Time Filter: Prevents Improper Activations Due To Sudden Variations In Luminosity Such As Lightning, Lasers, Clouds, Etc. Delay Time Of 1 To 5 Minutes For Contact Switching; Material: Polypropylene Cover (, Photocell Relay: Shorting Gap Voltage: 127-220Vac (105-305 Vac); Operating Frequency: 50/60Hz; Consumption: Does Not Consume Energy (0W); Dielectric Strength: 2500Vdc; Material: Polypropylene Resin (Uv-Stability), Pvc, Brass And Copper; Grade Protection: Ip65; Warranty: 1 Year; Dimensions: 38.9X 76.5Mm; Indelible Marking Map Of The Moment Of Removal And Placement In The Field; 1000W/15A, Base For Photocell Relay: Swivel Base Socket (360) With Plastic Support For Photoelectric Relay. Low Swivel Socket For Relay, Bivolt, With Plastic Support; Fitting; Connection To 3 Wires: Phase 1 (Black), Neutral Or Phase 2 (White) And Load (Red); Cross Section Of Wires Of 1.5Mm, Length Of 20Cm And Standard Stripping Of 25Mm;
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
