Bids Are Invited For Record Of Furniture Prices - School Sets, Intended To Serve Students Enrolled In Schools Of The Municipal Education Network Of The Municipality

Fnde Standard School Set - Cja04. Student Set Size 04, Table And Chair: Table: Steel Tube Structure, Sides And Book Holder Support In 29X58mm Plate 16 (1.5Mm). Upper Crossbar For Fixing The Top In 31.75Mm (1¼) Plate 16(1.5Mm). Lower Base (Feet) In 38Mm (1½) Plate 16 (1, 5Mm). Closing With Injected Polypropylene Tips And Shoes In Red, Fixed To The Structure Using 4.8X16mm Diameter Snap Rivets. Book Holder (503X304mm) In Injected Polypropylene In Gray Color. Top (600X450mm) In 18Mm Thick Mdp, Covered On The Upper Face In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish In Gray Color And Covered On The Lower Face In Balancing Sheet - Against 0.6Mm Phenolic Plate. Application Of Claw Nuts With Metric M6 Thread And 10Mm Length. Pvc Maple Tapes With (Primer), Textured Finish In Red Color Glued With Hot Melting Adhesive, Nominal Dimensions Of 22Mm (Width) X 2.5Mm (Thickness). Rounded Corners. Fixing The Top To The Structure Using 06 M6 Metric Thread Clamp Nuts, Diameter 6Mm), 06 M6 Metric Thread Screws (6Mm Diameter), Length 47Mm Pan Head, Philips. Painting Metallic Elements With Hybrid Epoxy Powder Paint, Glossy Electrostatic, Minimum Thickness Of 40 Microns, Gray Color. On The Right Side Of The Table, External Face, It Must Contain The Identification Of The Dimensional Standard Through A Pad Printing Process, Size 35X37mm. Table Height: 640Mm. The Molds For The Tips, Shoes And Book Holders Must Be Marked With The International Recycling Symbol, Showing The Polymer Identification Number And The Name Of The Manufacturing Company. Injected Parts Must Not Present R, Fnde Standard School Set - Cja06. Student Set Size 06.5Mm). Closing With Tips And Shoes Injected Polypropylene In Blue Color, Ncor Blue Textured Finish Glued With Hot Melting Adhesive, Size 35X37mm. Table Height: 760Mm. In The Tip Molds, Showing The Polymer Identification Number And The Name Of The Manufacturing Company. Injected Parts Must Not Have Rebar