Rubber Gaskets D.100 Thickness 4 Mm Rubber Gasket Dn 80 Mm 4 Gost 15180-86, Weld-In Valves A Steel Ball Valve For Welding Dn 50 Is A Shut-Off Valve Designed To Completely Shut Off Or Regulate The Flow Of The Working Medium In High-Pressure Pipelines. The Main Element Is A Ball With A Passage Hole That Rotates 90°, Ensuring Rapid Opening Or Closing Of The Flow., Grinding Disc Grinding Wheels (Metal) 230X6x22.23 Are Characterized By High Aggressiveness, Good Cutting Abilities And Maximum Productivity. These Wheels Are Used In A Wide Range Of Processing - Flat, Face Grinding, For Removing Burrs And Burrs, Processing Welds And Working On Edges. Diameter 230Mm. Thickness 6.0Mm., Reactor Valve Steel Wedge Cast Flanged Valve 30S41nzh With A Sliding Spindle Is Installed In Pipelines To Shut Off Liquid And Gaseous Media That Are Not Aggressive To 25L Steel, Have An Operating Pressure Of 1.6 Mpa (16 Kgf/Cm2) And An Operating Temperature From -40 To +425 °C. Gate Valves 30S41nzh Are Manufactured With A Diameter Of Dn80. They Have A Flange Connection To The Pipeline (Standard Connection Dimensions According To Gost R 54432, Version B Row 1). The Valve Tightness Is Class A, Aa, B, C. The Spindle Seal Is Stuffing Box. In The Upper Position, The Spindle Has A Seal Along The Conical Surface In The Cover. The Direction Of Supply Of The Medium Is From Either Side Of The Main Flanges. Series 16. Valve For The Reactor Cover 36/40 Is Designed For Hermetically Shutting Off Or Adjusting The Flow Of Liquid/Gas In A Reactor With A 36/40 Mm Grinding Connection (Standard Ns 36/40 Or Gost 25336). (Coordination With The Customer), The 230X3mm Cutting Wheel Is A Durable Abrasive Wheel For Cutting Metal, Including Stainless Steel, With High Performance And Wear Resistance. Used With Angle Grinders With A Diameter Of 230 Mm., Steel Coupling A Coupling Is A Part With Which You Can Connect Pipe Sections And Form A Single Supply System. Installation Of Such Parts Is Characterized By Minimal Labor Intensity. A Steel Coupling Is A Type Of Fitting And Is Used To Form Connections Between Individual Pipe Sections. It Is Well Known That In The Process Of Assembling Pipelines For Various Purposes, Water Supply And Heating Systems, A Lot Of Elements Are Used (Pipes, Couplings Of Various Types, Etc.) That Make It Possible To Connect Pipes That Are Stable And Durable. The Connection Is Formed By Welding Or Installing Fittings. Pipe Couplings Have A Number Of Advantages And Disadvantages, The Main Of Which Are: Practicality In Use; Long Service Life; Simplicity During Installation Work; Collapsible Repair Room.Du15, A Locknut Is A Part Of A Pipeline System That Is Screwed Onto The Thread Of A Connecting Element To Prevent It From Spontaneously Unscrewing Under Conditions Of High Operating Pressure Or Thermal Expansion Of The Metal. Locknuts Are Used On Almost All Runs. As For Other Threaded Connections, The Need For Such Parts Appears When High Pressure And Temperature Are Observed, Or If The Thread Along Its Length Allows You To Screw On A Lock Nut Without Causing Damage To The Product. Steel Locknuts Are Made From Hexagonal Blanks And Water Pipes With Pipe Threads In Accordance With Gost 8968-75. This Standard Applies To Straight Thread Steel Locknuts With And Without Zinc Plating. Du20, Steel Rod Dn15 Mm L110 Mm Gost 8969-75
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
