Stamp Ink Purple 28 Ml, Water-Based, Water-Based Stamp Ink For Refilling Stamp Pads. The Stamp Impression Can Be Applied To All Types Of Paper Except Glossy. Used With All Types Of Rubber And Polymer Cliches. For Ease Of Use, The Bottle Is Equipped With A Dispenser., Kuzbasslak Bt 4.0 Liters, Black Metal Can. Kuzbasslak Bt-577 (Bitumen Varnish) Is A Black Protective Coating Designed To Protect Metal, Wood And Concrete From Corrosion And Moisture. Black (Glossy Surface). Volume: 4 Liters (Usually Weight Is About 3-3.2 Kg). Anti-Corrosion Protection Of Metal Structures, Waterproofing Of Concrete And Wooden Surfaces, Including For Outdoor Use. Drying Time: At A Temperature Of +20 °C - About 24 Hours (To Degree 3), With Hot Drying (100–110 °C) - About 20 Minutes. Gost 28196-89, Hammer Enamel Blue 2.5 Kg, Metal Can. Blue Hammer Enamel Is A Decorative And Protective Coating For Metal That Creates A Hammered Texture (Hammer Marks). It Hides Defects, Has Anti-Corrosion Properties, And Is Suitable For External And Internal Work (Gates, Fences, Safes). The Base Is Most Often Alkyd, Drying Time Is Up To 24 Hours. Level Of Gloss: Glossy, Less Often Semi-Matte/Muted Gloss (Effect 66 According To The Gloss Meter). Base: Alkyd, Acrylic Or Synthetic. Room Type: Wet And Dry Rooms, Outdoor Work. Purpose: Metal (Including Rusty), Wood. Properties: Heat Resistance (Up To +80°C...+150°C), Moisture Resistance, Wear Resistance. Rust Protection: Can Be Applied Directly To Rusty Surfaces. Concealment Of Defects: Thanks To The Relief Structure, It Hides Metal Irregularities. Quick Drying: Some Types Dry “Touch” In 20-30 Minutes (Complete Drying Up To 24 Hours). Gost 28196-89, Brown Enamel Pf-115 In 2.8 Kg Packaging, Metal Can, Often Indicated As 2.8 Kg, Which With The Density Of Alkyd Enamels Approximately Corresponds To A Volume Of About 2-2.5 Liters, But Is Usually Packaged In Cans - This Is A Universal Alkyd Paint For External And Internal Work Consumption Per Layer: 100–180 G/M² (Depending On The Application Method, Surface Structure And Color). Packaging: Metal Can, Weighing 2.8 Kg. Gost 28196-89, White Enamel Pf-115 20 Kg, Metal Bucket. Characteristics: Universal Alkyd Enamel For Exterior And Interior Use (Metal, Wood, Concrete). Glossy, Weather-Resistant, Resistant To Moisture And Detergents. Consumption Is 100–180 G/M² Per Layer, Touch-Drying Time Is About 6-24 Hours. Provides A Durable Coating With Good Hiding Power. Alkyd Enamel (Based On Pentaphthalic Varnish). Gloss Level: Glossy Drying Time: At Temperatures Up To 24 Hours (Full), Up To 6-8 Hours Between Coats. Consumption: 100–180 G/(In One Layer), Depends On The Application Method. Thinner: White Spirit, Solvent, Turpentine. Color: White (Resistant To Yellowing). Application And Benefits: Scope Of Application: Painting Metal, Wood, Concrete And Plastered Surfaces. Suitable For Residential And Industrial Premises, Exterior Painting. Advantages: High Hardness (0.15-0.2 Cu), High Adhesion, Excellent Hiding Power, Glossy Effect, Resistance To Weathering And Temperature Changes. Gost 28196-89, Garbage Bags Without Ties, 35 Liters, Heavy-Duty, 50 Pcs Per Roll, Main Technical Characteristics: Garbage Bags With A Volume Of 35 Liters Are Intended For Household And Household Purposes. Made From Durable 30 Micron Thick Polyethylene, Tear And Puncture Resistant. Material: Hdpe (Low Density Polyethylene): Rustling, Thin, High Load Capacity, But Sensitive To Sharp Edges. Thickness 7–25 Microns. Ldpe (High-Density Polyethylene): Smooth, Stretchy, Tear- And Puncture-Resistant. Thickness 25–100+ Microns. Polypropylene (Pp): Construction Bags, Density From 38 To 90 G/M², High Tensile Strength. Gost 12302-2013
