Bids Are Invited For Price Registration System For Future And Possible Acquisition Of Paints, Coatings, Waterproofing, Preparatory Materials, Structural Repair Consumptions And Painting Accessories.

Mineral Turpentine 5Laguarrás Mineral, 1St Line, Suitable For Diluting Synthetic Enamels, Varnishes, Primers And Compatible Products, As Well As For Cleaning Brushes, Rollers, Brushes, Spray Guns And Other Tools, As Recommended By The Paint Manufacturer. Product With Good Solvent Power, Adequate Evaporation And Original Sealed Packaging. Quality Reference: Anjo, Eucatex, Suvinil, Coral Or Superior Technical Equivalent., Flexible Polymeric Cementitious Mortar For Waterproofingflexible Polymeric Cementitious Mortar, Two-Component, Suitable For Waterproofing Reservoirs, Water Tanks, Cisterns, Swimming Pools, Walls, Floors, Slabs, Elevated Or Buried Structures, Cold Areas And Other Surfaces Subject To Humidity, Infiltration, Moderate Structural Movements Or Hydrostatic Pressure. Product Formulated Based On Portland Cement, Mineral Aggregates, Polymeric Resins And Special Additives, Resulting In A Flexible Waterproof Membrane With High Adhesion, Resistance And Durability. It Must Have The Ability To Absorb Microcracks In The Substrate, Excellent Adhesion To Concrete, Mortar And Masonry, Resistance To Positive And Negative Hydrostatic Pressure, Low Permeability And Ease Of Application In Crossed Coats With A Brush, Brush, Hair Broom Or Compatible Tool. Suitable For Internal And External Use, Including In Suspended, Buried Or Subject To Thermal Variations. When Intended For Reservoirs And Surfaces In Contact With Drinking Water, It Must Not Alter The Potability Of The Water And Must Be Non-Toxic And Odorless, In Accordance With The Manufacturers Specifications. Product Complies With Abnt Nbr 11905, Abnt Nbr 9575 And Abnt Nbr 9574, Or Equivalent Supervening Standards. Minimum Application In 3 Coats Or According To The System Recommended By The Manufacturer. Mixture Usage Time (Pot Life) Minimum 30 Minutes. Minimum Cure Between 5 And 7 Days, Depending On The Manufacturer And Environmental Conditions, Before The Tightness Test. The Packaging Must Contain Information On Consumption, Yield, Preparation Of The Base, Mixing Proportion, Interval Between Coats, Curing, Expiration Date And Instructions For Use. Quality Reference: Viaplus 5000, Sikatop Flex, Tecnoaqua Flex 5000 Or Higher Technical Equivalent. Packaging/Kit With 18 Kg., Thixotropic Structural Repair Mortar, Cementitious Technical Mortar For Structural Repair, Thixotropic, Single-Component, Ready For Use Through Controlled Addition Of Water, Indicated For The Recovery And Recomposition Of Deteriorated Concrete Structures On Vertical, Horizontal Surfaces And Ceilings, Without Runoff, Including On Slabs, Beams, Pillars, Stairs, Balconies, Pre-Molded Elements, Reservoirs, Bases And Other Structural Components. Product Formulated Based On Portland Cement, Selected Aggregates, Polymers And Special Additives, And Must Present High Adhesion To Existing Concrete, High Mechanical Resistance, Compensated Shrinkage, Resistance To Carbonation, Low Permeability And Protection Against Penetration Of Water And Aggressive Agents. Suitable For Repairs Resulting From Reinforcement Corrosion, Covering Detachment, Concreting Failures And Superficial Or Localized Degradation Of Concrete. It Must Allow Manual Application Against Gravity, In Successive Layers, With Excellent Workability And Finish, Allowing Minimum Thicknesses Of 10 Mm And Maximum Thicknesses Compatible With The Manufacturers System, Including Localized Applications Of Greater Thickness