Pvc Napa Apron, White, With Hems Sewn With 1 Cm Turned Once. Placement Of 1Cm Denim Piping, 100% Cotton (Placed) Along The Entire Length Of The Armhole Of The Apron, With 42 Cm At The Top For Tying The Neck And 57 Cm At The Bottom For Tying The Waist. All Seams Must Be Made With The Thread Of The Color Of The Fabric. The Piece Must Be Clean, Free From Any Defects That Compromise Its Presentation. See Measurement Table, As Shown In Figure V, Thick Canvas Bag In Khaki Color Measuring 30X40, With Dividers And Reinforced Shoulder Strap, With Logo As Per The A.C.E. Model, High Leather Boots, With A Resistant And Comfortable Design. With A Robust Sole With Ribs That Help With Water Drainage, As Well As Resistance To Abrasion And An Eva Midsole That Absorbs Impacts. Internal Abs Structure For Greater Stability And Support To Prevent Twisting. In Nubuck Leather, With Insole With Anatomic System Technology.., Black Rubber Boot, Long Shaft, Seven Leagues Model, Without Internal Cotton Lining. (In Sizes From 36 To 44), Cowhide Leather Boots. Polyurethane Outsole, Black Density, Assorted Sizes. (Sizes 38, 39, 41, 42, 43), Safety Boot Made Of Nubuck Leather, With Fibrous And Microporous Structure That Helps Maintain The Feets Temperature. (In Sizes From 36 To 44). 46)., Pants In Denim Fabric, Non-Transparent White, Without Pockets And With Reinforced Seams. Waist Apply 4 Cm Elastic Attached With 4 Needle Chain Stitch Machine. Bar With 1.5 Cm Simple Hem Turned Twice. The Items Identification Label Must Be Attached To The Inside (Back) Part Of The Waistband (Elastic). All Seams Must Be Sewn Using Thread That Matches The Color Of The Fabric. The Piece Must Be Clean, Free From Any Defects That Compromise Its Presentation. With Logo As Per Model And Color To Match, As Per Supply Order., Womens Viscolycra Mesh Pants, Comfortable, Elastic Waist, With Four Functional Front Pockets, In Blue. (Size: S, M, L, Xl, Xl, 3L, 4L). Lining Throughout The Internal Part, Upper With Lining In Synthetic Non-Woven Material, Upper With A Height Of 85Mm + 5%, Insole Sewn To The Upper Using The Strobel Process, With Elastic Closure On The Sides, Removable Hygienic Insole With Antibacterial 3Mm + 10%, Bi-Density Pu Outsole Injected Directly Onto The Upper, Being The Midsole (1St Layer) With A Density Of 0.4G/Cm3 Throughout The Entire Layer And The Sole (2Nd Layer) With Greater Resistance To Friction With The Ground With A Density Of 1.0G/Cm3 + 10% With Grooves Of 3Mm + 10% In Height And Width Of 6Mm (+ 10%), Seam Line Type 100% Polyamide/Polyester, Without Steel Toe Cap, With Indelible Engraving Of The Size, Manufacturers Name And Case Number. The Footwear Must Be Classified As Light Or Normal, According To Standard Nbr-14835, Be Comfortable And Comply With Nbr 14834/2008, Nbr Iso 20344/2008 And Other Relevant Standards. Numbering Sizes From 34 To 44., As Figured, Short Sleeve Shirt In Synthetic Fabric (Polyester) With Sublimation Printing, Round Neck, In Various
