Iae. Sealant Is One-Component Polyurethane Adhesive. Properties: High Modulus And Low Conductivity. Curing Speed 3-4 Mm In 24 Hours. The Volume Of The Tube Is At Least 310 G. Consistency: Paste, Black. Density 1.27 G/Cm³. The Polymerization Mechanism Is Moisture-Curing, Accelerated. Recommended Application Temperature Is 50 To 65°C. Gost 25621-2023. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics. Ball Valve, Steel, Size Up To 50 Mm. Type: Coupling (Threaded). Control Type: Manual. Valve Function: Three-Way. Nominal Diameter (Dn/Dn): 10 Mm. Thread (Inches): 3/8. Operating Pressure: Up To 6.3 Mpa (63 Bar). Body Material: Stainless Steel. Seal: Ptfe. Certificate., Iae. Steel Ball Valve, Nominal Pressure 0-420 Mpa, Diameter 10-1400 Mm, Pneumatic/Hydraulic. Ball Valve With Double Acting Pneumatic Actuator. The Kit Includes A Rotary Pneumatic Actuator, An Electric Pneumatic Positioner (Distributor) And Limit Switches For Position Signaling. Conventional Diameter (Dn): 50 Mm (2 Inches). Construction Type: Ball. Flow Direction: Three-Way. Type Of Design: Mayevsky 4. Thread Diameter, Inches: 2. Operating Pressure From 4 Mpa To 6.3 Mpa. Drive Type: Rotary Pneumatic, Double Acting (Air-To-Air). The Kit Includes: 1) Full Bore Ball Valve, Stainless Steel Material; 2) Pneumatic Actuator: Rotary. 3) Pneumatic Distributor: Electromagnetic 220V; 4) Limit Switch: Limit Switch Block (Mechanical Or Inductive). Connection: Gost 34293-2017., Iae. Teflon Tape, Thickness 100-200 Microns. Material: 100% Teflon. Length Not Less Than 10 M, Width Not Less Than 12 Mm, Thickness Not Less Than 0.2 Mm (200 Microns). Gost 24222-80. Certificate., Iae. Brass Ball Valve, Nominal Pressure 0-420 Mpa, Diameter 10-1400 Mm, Manual. Three-Way Valve With A Diameter Of 15 Mm. With Tension Nut. Thread: M20x1.5 (Internal), M20x1.5 (External). Working Pressure Up To 25 Bar (2.5 Mpa). Maximum Temperature: 150°C. Body Material: Brass. Seal: Ptfe Gasket. St Rk Iso 7121-2017 Certificate.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
