Request For Quotation Purchasing Equipment For The Laboratory

Multimeter Multimet-1Pcs Is Designed To Measure The Contiguity Between Connections Alternating Voltage 200.0 Mv - 600 V Alternating Voltage (Error) 1.2% Direct Voltage 200.0 Mv - 600 V Constant Voltage (Error) 0.5% Direct Current 200.0 Μa - 10 A Direct Current (Accuracy) 1.0% Resistance (Max. Resolution) 20000.0 Ohm Resistance (Accuracy) 0.8% Detection Of Damage To Wiring, Connections., Diesel Power Plant 10 Kw Rated/Reserve Power 10 Kw / 10…12.5 Kva, Voltage 230 V (1 Phase) Or 230/400 V (3 Phases), Frequency 50 Hz, Power Factor Cosϕ ≈ 0.8–1.0, Vertical 4-Stroke Diesel Engine With Air Or Liquid Cooling, Electric Starter, Fuel Tank ≈ Up To –200 L, Fuel Consumption Under Load ≈ 3.2–4.2 L/H (Approx.) At 100% Load, Noise Level ~50–80 Db(A) @7 M (Quiet/Noise-Insulated), Protection System: Automatic Stop At Low Oil Pressure/Overheating, Automatic Voltage Regulator (Avr), Brushless/Pmg Generator, Interfaces: Sockets/Automatic Machines/Voltmeter/Ammeter, Weight ≈170–456 Kg, Dimensions Approximately 720×550×620 Mm…1500×700×1300 Mm, Version: Open On The Frame / In A Noise-Proof Casing / In A Container, Ats / Control Panel / Remote Start - Optional., Cordless Screwdriver Set (Thin + More Powerful): Thin Screwdriver: Power Supply Li‑Ion Battery ~2Ah, Rated Voltage 3.6–4V; Max. Torque ≈4–6N M; Idle Speed ≈200–250 Rpm; Bit Holder 1/4″ Hex; Usb-C Charging; The Body Is Compact And Lightweight; Thicker/More Powerful Screwdriver: Powered By Li‑Ion Battery ~2–3Ah, Voltage 3.6–4V; Max. Torque ≈8–12N M; Idle Speed ≈300–400 Rpm; Bit Holder 1/4″ Hex; Presence Of Mechanical Torque Adjustment; Delivery Set: 2 Cordless Screwdrivers (Thin + More Powerful), A Set Of Bits (~20–40 Pcs) (Ph/Sl/Torx/Hex), 2 Usb‑C Charging Cables, Batteries (Built-In Or Replaceable), Case/Organizer, User Manual, Packaging., Heat Resistant Silicone Soldering Welding Mat Heat Resistant Silicone Soldering Mat (Large): Material: High Quality Heat Resistant Silicone (Organic), Anti-Static/Non-Conductive, Non-Toxic, Flexible And Durable; Work Surface Size Approx. 480×318…550×350 Mm (≈48×31.8…55×35 Cm); Thickness ≈3…5 Mm; Heat Resistance Up To ≈500 °C (≈932 °F); Surface With Sections/Cells For Small Parts, Built-In Metric Ruler ~0–36 Cm, Magnetic Zones/Cells For Screws; Anti-Slip Texture, Resistant To Solder Drops, Heat And Scratches, Easy To Clean; Suitable For Soldering Circuit Boards And Repairing Electronics, Smartphones, Laptops, Drones, Etc.; Set - 1× Silicone Heat-Resistant Mat (Accessories May Include Magnetic Compartments/Drawers On Selected Models)., Third Hand Holder-Stand (Weighted Metal Base), Body Material Metal + Abs Plastic, Glass Lens Ø≈65...90 Mm, Magnification ≈×2.5...×3 (On Some Models Additional Magnifying Lenses ≈×7.5...×12), Led Backlight Integrated Into The Magnifying Glass (Usually 2...5 Leds), Backlight Power Supply 3×Aaa / 3×Aa Batteries (Not Included) Or External Adapter/Usb (Depending On Model), 2 Pcs Alligator Clips With Flexible Articulated Arms, Soldering Iron Holder (Coil/Stand), Stabilizing Base, Angle And Position Adjustment Of Lens And Clamps, Sometimes Wire Stand/Spool Of Solder, Packaging And Instructions., Set Of Cordless Power Tools Tool Type Cordless Number Of Tools 7 Tools In The Set: Wrench, Circular Saw, Drill-Driver, Hammer Drill, Angle Grinder, Sander, Chain Saw Composition (Details) Total Number Of Tools - At Least 7, Number Of Batteries - At Least 6, Charger - At Least 2 Battery Type Li-Ion Battery Capacity 4.0 Ah Number Of Batteries At Least 6 Case Included Yes Weight 7.0 Kg The Set Should Include: 1. The Impact Wrench Is A Powerful Tool For Car Service, Equipment Repair, Structural Assembly And Installation. Provides High Torque And Stable Performance. 2. Circular Saw - Designed For Cutting Wood, Plywood, Osb, Plastics And Other Materials. It Is Characterized By High Accuracy And Stability During Operation. 3. Drill-Driver - A Universal Tool For Drilling And Tightening Fasteners. It Has Several Speeds, Reverse And Comfortable Ergonomics. 4. Hammer - Indispensable For Concrete, Brick, Stone. Suitable For Drilling, Chiseling And Creating Holes For Anchors.5. Angle Grinder (Grinder) - Used For Cutting Metal, Grinding, Cleaning And Working On Stone. It Has Stable Speed And A Protective Casing. 6. Grinding Machine - Allows You To Perform Finishing Processing Of Wood, Metal And Other Surfaces. Provides Smooth And Accurate Grinding Without Vibrations. 7. Chainsaw - Suitable For Cutting Wood, Trimming Branches And Household Work. Lightweight, Compact And Safe To Use., Jigsaw Machine Stationary Jigsaw Machine - Power 80–120 W, Power Supply 220 V, Saw Blade Length 127 Mm, Stroke Rate 400–1600 Strokes/Min (Adjustable), Max. Cutting Thickness 57 Mm, Max. Workpiece Width 406 Mm, Table 413×253 Mm With An Inclination Of 0–45°, Dimensions 644×316×330 Mm, Weight 12.5 Kg., Glue Gun Set Of Glue Guns (2 Pcs.) - 1× For Rods Ø11 Mm And 1× For Rods Ø7 Mm, Power Supply 220–240 V, Power ~60–100 W (11 Mm) And ~20–40 W (7 Mm), Fast Heating 3–5 Min, Operating Temperature ~170–200 °C, Metal Nozzles With Anti-Drip Protection, Trigger Feed, Heat-Resistant Body, Folding Stands, For Handicrafts And Household Repairs., Drilling Machine Power From 200 To 2000 W - Affects The Ability To Drill Hard Materials. Adjustable From 100 To 3000 Rpm. Clamps The Drill (Most Often Up To 13 Mm Or 16 Mm)., Sharpening Grinding Machine Tabletop Belt-Disc Grinding Machine, Power 250 W, Power Supply 230 V, Belt 770×25.4 Mm (14 M/S), Disk Ø125 Mm (2980 Rpm), Table Angles 0–45° (Stop −45…+45°), Aluminum Tables, Nozzles 38/45 Mm, Dimensions 370×290×400 Mm, Weight 7.5 Kg, Milling Machine Machine Type Universal Vertical-Horizontal Turret Milling Machine Worktable Size ~1270 × 254 Mm Number Of At Least T-Slots 3 Pcs., Width ~16 Mm, Pitch ~65 Mm Axis Movements (X/Y/Z) Approximately 780–850 Mm / 380–410 Mm / 380–400 Mm Stroke Spindle (Quill) About 127 Mm Spindle Taper R8 Or Iso/Nt30 Or Iso/Nt40 (Depending On Version) Spindle Speed Range In Steps From About 60–70 To 4500–4600 Rpm Spindle Motor Power About 2.2–3.0 Kw Head Rotation/Tilt Rotation ±90°, Tilt ±45° Machine Weight From 1200–1500 Kg Machine Dimensions Approximately No Less Than 1700×1800×2300 Mm, Metal Cabinet Cabinet Made Of Cold-Rolled Steel 0.7-1.2 Mm Thick, Powder Coated, Adjustable Shelves, Each Can Support 40-150 Kg, Resistant To Corrosion And Mechanical Damage, Suitable For Office, Warehouse Or Workshop., Digital Servo Tester X 1 For Testing Servos And Regulators (Esc), Supply Voltage 4.8-6V. Ability To Change The Frequency Of The Output Signal (Pulse Width Button) 50Hz, 125Hz, 250Hz. There Are 3 Operating Modes (Select Button): Manual - Rotation To The Set Angle, Neutral - Installation To The Middle Position. Automatic - Turn Right/Left At A Given Speed.