Request For Quotation Medical Bag For Collecting Class A And B Waste

Medical Bag For Collecting Class B Waste 20 Microns 500 X 600 (Yellow). The Package Contains An Information Window Containing The Following Information: Waste Class, Name Of The Health Facility, Date Of Waste Release, Name Of The Health Facility, Date Of Waste Release, Full Name Of The Person Responsible For Waste Disposal. The Information Window Is Located In The Center Of The Package And Is Printed Using Flexographic Printing. A Package Of Two Layers: Outer Layer High-Density Polyethylene 30%; Inner Layer Low-Density Polyethylene 70%; Color Corresponds To The Color Coding Of Class A, B, C, D Waste. The Seal Seam Is Located Along The Width Of The Bag, There Is No Side Seam. The Seam Width Is 1.5 Mm. The Tensile Strength Of The Weld Seam Is At Least 70% Of The Film Strength. The Goods Must Be Delivered To The Customers Warehouse, Including Unloading. Gost 12302-2013, Kbu Box Made Of Corrugated Cardboard For Waste B-Class, Volume 10 Liters. The Box Is Made Of 3-Layer Cardboard, Internal Dimensions: 206 * 177 * 207 Mm. Labeling In Kazakh And Russian Languages. The Kit Includes 2 Bags Of 30 Microns, Size 330X330 M 500X600 Mm. The Package Should Contain Information A Window Containing The Following Information: Waste Class, Name Of The Health Facility, Date Of Waste Disposal, Full Name Of The Person Responsible For Waste Disposal. The Information Window Must Be Located In The Center Of The Package And Printed Using Flexographic Printing. The Goods Must Be Delivered To The Customer’S Warehouse, Including Unloading Work., Medical Bag For Collecting Class B Waste, 20 Microns, 700 X 800 (Yellow). The Package Contains An Information Window Containing The Following Information: Waste Class, Name Of The Health Facility, Date Of Waste Release, Name Of The Health Facility, Date Of Waste Release, Full Name Of The Person Responsible For Waste Disposal. The Information Window Is Located In The Center Of The Package And Is Printed Using Flexographic Printing. A Package Of Two Layers: Outer Layer High-Density Polyethylene 30%; Inner Layer Low-Density Polyethylene 70%; Color Corresponds To The Color Coding Of Class A, B, C, D Waste. The Seal Seam Is Located Along The Width Of The Bag, There Is No Side Seam. The Seam Width Is 1.5 Mm. The Tensile Strength Of The Weld Seam Is At Least 70% Of The Film Strength. The Goods Must Be Delivered To The Customers Warehouse, Including Unloading. Gost 12302-2013, Medical Bag For Collecting Waste Class A, 20 Microns, 500 X 600 (Black). The Package Contains An Information Window Containing The Following Information: Waste Class, Name Of The Health Facility, Date Of Waste Release, Name Of The Health Facility, Date Of Waste Release, Full Name Of The Person Responsible For Waste Disposal. The Information Window Is Located In The Center Of The Package And Is Printed Using Flexographic Printing. A Package Of Two Layers: Outer Layer High-Density Polyethylene 30%; Inner Layer Low-Density Polyethylene 70%; Color Corresponds To The Color Coding Of Class A, B, C, D Waste. The Seal Seam Is Located Along The Width Of The Bag, There Is No Side Seam. The Seam Width Is 1.5 Mm. The Tensile Strength Of The Weld Seam Is At Least 70% Of The Film Strength. The Goods Must Be Delivered To The Customers Warehouse, Including Unloading. Gost 12302-2013, Medical Bag For Collecting Waste Class A 20 Microns 700 X 800 (Black). The Package Contains An Information Window Containing The Following Information: Waste Class, Name Of The Health Facility, Date Of Waste Release, Name Of The Health Facility, Date Of Waste Release, Full Name Of The Person Responsible For Waste Disposal. The Information Window Is Located In The Center Of The Package And Is Printed Using Flexographic Printing. A Package Of Two Layers: Outer Layer High-Density Polyethylene 30%; Inner Layer Low-Density Polyethylene 70%; Color Corresponds To The Color Coding Of Class A, B, C, D Waste. The Seal Seam Is Located Along The Width Of The Bag, There Is No Side Seam. The Seam Width Is 1.5 Mm. The Tensile Strength Of The Weld Seam Is At Least 70% Of The Film Strength. The Goods Must Be Delivered To The Customers Warehouse, Including Unloading. Gost 12302-2013