Bids Are Invited For Price Registration For Eventual And Future Supply And Installation Of Shelters For Bus Passengers, Including Labor, Materials, Customization And Visual Communication, Destined For The Maintenance And Expansion Of The Urban Mobility Infrastructure Of The Municipality Of São João Batista – Sc.

Bus Shelter 01: Supply And Installation Of Shelter For Bus Stop, With Robust Metal Structure And Curved Design. The Equipment Must Comply With The Following Minimum And Approximate Technical Specifications: Width Of 2870 Mm, Depth Of 2010 Mm (Coverage) And Total Height Of 2250 Mm; Manufactured In High-Resistance Galvanized Steel, With Support Columns Of 102Mm Diameter And Structural Reinforcements Of 51Mm Diameter With A 2.65Mm Wall In Galvanized Steel; Full Closure At The Bottom And Closure On Only One Side, As Defined By The Municipality (The Other Side Must Remain Completely Open) And Roof Made Of 1.50Mm Galvanized Sheet Metal; Integrated Bench With Longitudinal Extension, Made From Treated And Varnished Itaúba Type Solid Wood Planks (Dimensions 40 X 300 X 2725Mm); Protection Against Corrosion Through Electrostatic Powder Painting (Color To Be Defined By The Municipality); Base With 400Mm Metal Shoes For Rigid Fixing To The Ground; The Contractor Must Provide The Shelter With Complete And Ready Customization, Including Sublimation Or Full Envelope With High Performance Polymeric Film According To The Layout Provided By The Municipality; Inclusion Of A Metal Front With The Name Of The Municipality And/Or Identification Of The Point In High-Intensity Reflective Material; Application Of The Municipal Coat Of Arms And Graphic Elements Of Visual Communication On The Side Closures And Bottom Of The Shelter, Using Materials Resistant To Uv Rays And Weathering; The Contractor Must Fully Observe Applicable Accessibility Standards, Especially Abnt Nbr 9050; The Supplier Must Obligatorily Deliver The Technical Manual, The Calculation Memorandum And The Art (Technical Responsibility Note) Of Design And Manufacturing Linked To Crea, Bus Shelter 02: Supply And Installation Of Shelter For Bus Stop In Pre-Cast Concrete With Acm Coating And Metallic Covering. The Equipment Must Comply With The Following Minimum Technical Specifications: Width Of 3000Mm, Depth Of 2500Mm (Coverage) And Total Height Of 2343Mm; Direct Foundations Through Reinforced Concrete Footings With 10Cm Lean Concrete Ballast; Pillars And Beams In Pre-Cast Reinforced Concrete (Machined Concrete), With A Perfectly Smooth Finish And Application Of Waterproofing For Exposed Concrete; Steel Profile Structure With Sandwich Tile (Aluzinc Filled With 30Mm Polyurethane And 0.43Mm Sheets). The Entire Metallic Structure And Tiles Must Receive Electrostatic Painting In A Color To Be Defined By The Municipality; Coating Of Support Pillars With Aluminum Composite Plates (Acm) In A Color To Be Defined By The Municipality, With Fixing To A Steel Structure And Grouting In Rubber Gaskets; Seat And Back In Sae 1010/20 Steel Structure With Treated Hardwood Trim, Chamfered Edges And Varnish Finish; The Contractor Must Deliver The Shelter Fully Customized And Ready For Use. Inclusion Of A Sign For Identification Of The Municipality And Application Of High Quality High-Relief Graphic Elements/Coat Of Arms According To The Layout Of The Works Department, Using Materials Resistant To Uv Rays; The Contractor Must Fully Observe Applicable Accessibility Standards