Tenders Are Invited For Court Building Construction Work – Wood-Concrete Composite Ceilings And Carpentry Work

Court Building Construction Work – Wood-Concrete Composite Ceilings And Carpentry Work. Scope Of The Work: 3,450M3 Of Spatial Scaffolding In The Building, Section By Section, Room By Room, Load Class 3 (2 Kn/M2) 650M Of Supports, Using Building Supports And Beams 460M2 Of Hbv Ceiling Above The 1St Floor, As A Flat Ceiling, With Composite Anchors, 8Cm Of Concrete Between The Wooden Beams 940M2 Of Hbv Ceiling Above The 2Nd Floor, As A Flat Ceiling, With Compound Anchors, 8Cm Concrete Over The Wooden Beams 250M2 Hbv Ceiling Above The 1St Floor, As A Combination Ceiling, With Composite Anchors, 8Cm Concrete Between And Over The Wooden Beams 1,200M2 Fill, On False Floor, 4-8Cm, Heavy Fill, With Interlocking Grains, Highly Resilient 1,350M2 Demolition Plaster/Plaster Base/Substructure On Undersides Of Wooden Beam Ceilings 1,350M2 Demolition Of Missing Floor/Blind Floor 1,600M2 Floor Insertion/New Missing Floor, Battens Cross-Section 60/80Mm, Formwork Boards 85 Pieces Beam Head Renovation By Cutting Back, Replacement With Fillers And Reinforcement With Wooden Pieces, On One Or Both Sides, Connected Using Press-In Dowels And Threaded Rods 10 Pieces Renovation Of Hanging Structures By Replacing And/Or Strengthening The Struts Using Wooden Beams And Welded Lugs As Pre-Timber Reinforcement 22 Pieces. Renovation Of Hanging Structures Through Base Point Renovation, The Supports Of The Hanging Structures Are To Be Re-Attached To The Joists Underneath The Ceiling Beams Using Threaded Rods. 40 Pieces Of Renovation Of Hanging Structures By Installing Steel Sheets For Reinforcement. Product-Related Awarding. The Static Calculation Of The Hbv Ceilings Was Created Using The Design Software From Friedrich Gmbh Verbundsysteme, From Helmbrechts. The Tender Is Based On The Results Of These Calculations. All Composite Anchors Used Are Product-Specific Manufacturer: Friedrich Verbundsysteme Type: Bifri Composite Anchor 8X180 Mm Perm. No. Z-9.1-851 All Disc Dowels Used Are Product-Related. Manufacturer: Simpson Strong-Tie Type: Bulldog Dowel