Dry Wipes No. 200. The Roll Of Wipes Must Be Supplied In An Individual Sealed Plastic Packaging Containing A Roll Of Dry Wipes With A Self-Adhesive Form. This Form Must Contain The Following Fields: Name Of The Product, Concentration Of The Solution, Disinfection Time, Batch Number, Expiration Date, Name Of The Employee Who Poured The Solution. There Are No Less Than 119 But No More Than 200 High-Strength Perforated Napkins Per Roll. The Main Size Of One Napkin Per Roll Is 15 ± 0.5 Cm × 30 ± 0.5 Cm (Folded). When Removed From The Dispenser, Each Napkin Automatically Unfolds Into A Candy-Shaped Form, Providing Full Expansion To A Size Of 30 ± 0.5 Cm × 30 ± 0.5 Cm (Unfolded). The Perforation Line Separating One Napkin From Another Must Be Clear To Ensure Their Economical Consumption. The Material From Which Napkins Are Made Must Contain At Least 40% Viscose And No More Than 60% Polyester. Material Density Is Not Less Than 60 G/M2. The Soaking Time Of Napkins With Liquid Detergent Or Disinfectant Should Be No More Than 1 Minute. The Volume Of Product Required For Uniform Impregnation Of Napkins Is 0.5 Liters. Also, Napkins Can Be Used Without Impregnation Instead Of Rags And Rags If Dry Cleaning Is Needed. The Treatment Area With One Napkin Is At Least 2 Square Meters. The Shelf Life Of The Replacement Unit In Individual Sealed Plastic Packaging Is Unlimited. Made In Kazakhstan. When Submitting An Application, The Potential Supplier Must Attach A Registration Certificate (Ra), St-Kz, Sgr, Instructions For Use
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
