Tenders Are Invited For Electrical Fitting Work – Electrical Installation Work - Bittweg 124

Electrical Fitting Work – Electrical Installation Work - Bittweg 124. The Work On The Energy-Efficient Renovation Of A Student Residence In Düsseldorf Was Divided Into Two Construction Phases For Organizational Reasons. In The First Construction Phase, The Risers Were Renovated And The Electrical Systems In The Student Apartments Were Replaced. In The Crawl Spaces, Installation And Routing Systems Were Created To Supply The Energy And Media Lines. A Low-Voltage Main Distribution Board Was Installed And Put Into Operation To Supply The Student Apartments. Thanks To The Work Carried Out, The Students Were Able To Move Into The Units Again At The Agreed Time. In The Second Construction Phase, The Main Building Distribution To Supply The Two Low-Voltage Main Distributions And The Supply Lines Are To Be Renewed. In Order To Ensure The Overall Supply And The Limited Overall Performance Available From The Supplier, Building Load Management Must Be Installed. In Order To Minimize The Shutdown Of The Heat Pump Stages, Larger Buffer Tanks And Additional Heaters Were Installed. These Are To Be Dynamically Supported In The Surplus Process Using A Pv System Currently Under Construction With A System Output Of 200 Kwp. Basically, Supplying The Units With The Decentralized Hot Water Supply For The Bathrooms Has The Highest Priority. The Energy Flows And Control States In Monitoring Can Be Clearly Displayed In The Software. In The Student Apartments, The Hallways, Stairwells And The General Areas Of The Second Construction Phase, The Electrical Systems Will Be Renewed In The Same Way As The First Construction Phase. The Outdated Electrical Sub-Distributions Are Dismantled And Replaced With Suitable Electrical Sub-Distributions. The Upper Din Rail With 12 Division Units Should Be Kept Free For The Installation Of Terminal Blocks Necessary For The Installation Of The Ventilation Control For The Electrical Installation Company That Has Already Been Commissioned. The Installation And Commissioning Of The Ventilation Integrated In The Windows For The Decentralized Control Of The Air Flow In The Kitchens And Bathrooms Must Not Be Jeopardized. When Planning The Route And Installation, It Must Be Taken Into Account In Consultation With The Construction Management That An Area Is Made Available For The Structured It Cabling Of The Electrical Installation Company That Has Already Been Commissioned. A Data Socket Is Installed In The Hallway And One In Each Room Of The Student Apartments. The Data Lines Have Already Been Laid In All Units And Will Now Be Finally Laid To The End Points And Put Into Operation Via The Cable Routes To Be Created By The Contractor In The Second Construction Phase By The Company That Has Already Been Commissioned. An Assembly Plan Must Be Created On A Separate Layer In Dwg Format, Compatible With Suitable Cad Software, Preferably Dds. In Order To Rule Out Collisions, The Assembly Plans Of The Contracted Contractors Are Digitally Superimposed, Checked And Carried Out By The Construction Management