Bids Are Invited For Price Registration For The Acquisition Of Flow Meters, Intended For Measuring, Monitoring And Controlling The Flow Of Water In The Collection, Adduction, Distribution Systems And Other Operational Points Of The Water Supply System Of The Autonomous Water And Sewage Service (Saae) Of The Municipality Of Marechal Cândido Rondon - Pr.

Volumetric Hydrometer, Features: Hydrometer For Cold Water, Volumetric Type, Intended For Micromeasurement, With The Following Minimum Features: Connections: Tips For Screwable Joints Compatible With Abnt Standard Diameter: Dn 20 (3/4) Thread G 1B Permanent Flow (Q3): 2. 5 M³/H Overload Flow (Q4): 3. 0 M³/H Or Higher Minimum Metrological Ratio R200 (Q3/Q1): As Established In Inmetro Ordinance No. 155/2022 And Iso 4064 Service Pressure: 10 Bar Length 190Mm Compatible With Abnt Standard Applicable Inclined Watchmaking (Approximately 45°), Extra-Dry Type, Adjustable Up To 360° Degree Of Protection Minimum Ip68 Accuracy Class 2Temperature Class T30 (Meter For Cold Water)Accessories: Supplied With Fittings, Without Connections.Normative Requirements:National Institute Of Metrology, Quality And Technology - Ordinances No. 155/2022 (Metrological Technical Regulation) And No. 102/2022 (Conformity Assessment) Iso 4064Applicable Abnt Standards (Ex: Nbr 15538, Nbr 8194 Or Updated Equivalents), Ultrasonic Hydrometer, Ultrasonic Type, Intended For Macromeasurement, With Transit Time Technology, With The Following Minimum Features: Connections: Flanged Ends Compatible With Applicable Abnt Standards Nominal Diameter: Dn 150 Permanent Flow (Q3): 250 M³/H Overload Flow (Q4): 320 M³/H Minimum Metrological Ratio R200 (Q3/Q1): As Established In Inmetro Ordinance No. 155/2022 And Iso 4064 Minimum Service Pressure: 16 Bar Minimum Degree Of Protection: Ip68 Accessories: Included, As Necessary For Installation (Seals, Screws And Compatible Components) Normative Requirements: National Institute Of Metrology, Quality And Technology - Ordinances No. 155/2022 (Metrological Technical Regulation) And No. 102/2022 (Conformity Assessment) Iso 4064 Applicable Abnt Standards (Ex: Nbr 14005, Nbr 16198, Nbr 7669, Nbr 7675 Or Updated Equivalents), With The Following Minimum Characteristics: Connections: Flanged Ends Compatible With Applicable Abnt Standards Nominal Diameter: Dn 100 Permanent Flow (Q3): 100 M³/H Overload Flow (Q4): 125 M³/H Metrological Relationship Minimum R200 (Q3/Q1): As Established In Inmetro Ordinance No. 155/2022 And Iso 4064 Minimum Service Pressure: 16 Bar Minimum Degree Of Protection: Ip68 Accessories: Included