Request For Quotation Purchase Of Spare Parts For Maz-500 Ks-3577

Gear Of A Cargo Winch On Maz-500. Tooth Type: Helical. Number Of Teeth: 12 Pcs. Material: High Strength Alloy Steel (Heat Treated). Weight: ~ 1.2 Kg (May Vary Slightly). Design: Helical Ring, Two Journals For Bearings, Keyed Connection, Square Shank (For Manual Rotation). Operating Temperature: From -40°C To +60°C. Gost Ks-3577.28.101-1., Autonomous Heater For Maz-500. Heating Capacity 2–8 Kw, Power Supply 12/24 V, Fuel Consumption 0.1–0.6 L/H And Use Of Diesel. The Devices Provide Heating Of The Interior With An Independent Heat Exchanger With A Fan, Operating Autonomously From The Engine. Main Types: Air (Dry) And Liquid. Main Technical Characteristics (Typical Values): Heating Capacity: From 4 To 8 Kw. Fuel Type: Diesel Fuel. Supply Voltage: 12 V/24 V. Fuel Consumption: 0.1–0.6 Liters Per Hour. Power Consumption: 10–60 W. Air Supply Volume: 70–250 M³/H. Control: Lcd Panel. Gost 30593-2025., Water Pump For Maz-500. Drive Type: Belt (From The Crankshaft) Housing Material: Cast Iron, Shaft Rotation Speed: 1500 Rpm (Nominal), Feed (Performance): At Least 30 L/Min, Working Pressure: 40 Kpa, Weight: ~ 7-8 Kg, Dimensions: Approximately 220X175 Mm. Gost 236-1307010-A., Oil Pump Nsh-100 For Maz-500. Type: Axial Piston, Non-Adjustable. Working Volume: 16 Cm3, Nominal Pressure: 16-20 Mpa (160-200 Kgf). Maximum Shaft Speed: 2500-3000 Rpm. Gost 19163., Clutch Assembly For Maz-500. Type: Double Disc, Friction, Dry. Applicability: Cars Maz-500, 503, 504. Diameter Of Driven Disks: 400 Mm (Friction Linings). Type Of Pressure Spring: Diaphragm (Or Coil Springs In Older Versions). Composition Of The Clutch Assembly (Basket): Drive Disc (Pressure): Cast Iron, Ensures Clamping Of The Discs. Driven Discs: Two Pieces, With Friction Linings. Clutch Housing: Housing Mounted On The Flywheel. Pressure Spring: Diaphragm Type. Release Clutch: Release Bearing. Gost 236-1005120-D., Platform Rotation Pump For Maz-500. Purpose: Drive The Platform Rotation Mechanism. Hydraulic Motor (Standard): Typically 303 Series (Axial Piston), But The Characteristics Are Also Met By Powerful Gear Hydraulic Motors That Ensure Rotation Of The Slewing Bearing (Slewing Support). Turntable Rotation Speed: 0.6–1.6 Rpm. Maximum Pressure In The Steering Hydraulic System: Often 16-20 Mpa (160-200 Bar). Gost 303.3.112.10.00., Compressor For Maz-500. Type: Piston, Two-Cylinder. Capacity: 201–275 L/Min (Depending On Modification And Measurement Conditions At 2000 Rpm). Maximum Pressure: Up To 1.0 Mpa (10 Kgf/Cm²). Cylinder Diameter: 60 Mm. Piston Stroke: 38 Mm. Displacement: 214 Cm³. Crankshaft Speed: Nominal: 2000 Rpm. Gost 500-3509015.