Tenders Are Invited For Renovation Of The Municipal Building At Ul. Krzeszowska 18 In Kamienna Góra

The Subject Of The Order Is The Execution Of Renovation And Thermal Modernization Works Of A Residential Building At Ul. Krzeszowska 18 In Kamienna Góra. The Building Is Located On A Plot According To The Land Register No. 244, District 7 Of The City Of Kamienna Góra. The Building Is Located In The Area Covered By The Local Development Plan For The Area Above Krzeszowska Street In Kamienna Góra (Resolution No. V/25/15 Of 2015-02-26 Of The City Council In Kamienna Góra). Additionally, The Building Is Entered Into The Municipal Register Of Monuments. The Subject Detached Building Is Located At Krzeszowska Street And Has Two Entrances From The Street And The Yard. On The Southern Side, In The Ground Floor Part, It Borders Utility Rooms. A Multi-Family Building, Three-Story, Without A Basement, Rectangular In Shape, Constructed Using Traditional Technology With Ceramic Brick Walls, Wooden Inter-Story Ceilings And A Flat Roof With A Wooden Structure, Covered With Felt Paper On Full Boarding. The Building Is The Property Of The Kamienna Góra Municipality. There Are 4 Residential Premises In The Buildings (Including Two Connected 1+2 And 3+4). The Administrator And Manager Of The Building Is Spółka Mieszkaniowa Sp. Z O. O. In Kamienna Góra. As Part Of This Order, On The Basis Of The Developed Design Documentation Constituting An Annex To The Opz, It Is Envisaged To Perform Construction Works, I.E.: - External Earthworks Including The Construction Of A Reinforced Pressure Wall For Foundation Walls; - Horizontal Moisture-Proof Insulation In The Form Of Double-Row Crystalline Injection And Vertical Heavy Coating Injection, - Renovation Of The Front Façade Of The Building, Which Includes Renovation And Strengthening Of Plasters, Renovation Of Cornices And Stucco Around The Windows, Renovation Of The Sandstone Plinth With Titanium-Zinc Flashings (Cornices) And Renovation Of Window Sills With The Installation Of Stone Window Sills, - Renovation Of The Remaining Facades Of The Building By Knocking Down The Existing Plasters, Local Repair Of Walls And Thermal Insulation Of The External Wall With Styrofoam Thickness. 15 Cm With A Coefficient Of Λ = 0.031 [W/(M·K)] Finished With Silicone Plaster Along With The Renovation Of The Sandstone Plinth, Construction Of A Plinth With Clinker Tiles On The Rear Facade And Installation Of Stone Window Sills, - Dismantling The Existing Roof Covering, Replacing The Formwork, Strengthening The Structure With Overlays To The Existing Rafters (Increasing The Cross-Sections) And Insulating The Flat Roof With Thick Polystyrene. 20 Cm Λ = 0.031[W/(M·K)] Including The Implementation Of A Two-Layer Covering Made Of Thermally Weldable Felt And The Replacement Of Sheet Metal Flashings, Gutters And Downpipes Made Of Titanium-Zinc Sheet And The Replacement Of The Roof Hatch, - Construction And Reconstruction Of Air-Flue Gas And Ventilation Ducts And Installation Of Wall Recuperators In Accordance With The Scope Resulting From The Technica