The Subject Of This Order Is The Renovation Of The Existing Surface Of Internal Roads In Os. Północ In The City. Chęciny. Construction Works Covered By The Application Include Plots No.: 69/1, 962/11, 963/5, 964/4, 965/4, 966/5, 967/5, 968/5, 969/5, 970/5, 971/7, 966/4, 966/2, Precinct 0001 And On Plots Registry No.: 1139/7, 1155/12, 1144/11, 1145/7 Precinct 0002; Cadastral Unit 260403_4 Chęciny - City With A Length Of Approximately 285.00 M. Characteristics Of The Works: The Roads Will Have A Bituminous Road With A Width Of 5.60 M To 6.10 M And 3.60 M, Framed On Both Sides With A 15X30 Concrete Curb Mounted On A Concrete Footing With Resistance, Renovation Of The Curb Drain With 2 Rows Of Paving Stones At Km 0+056.06 To Km 0+113.85 And Renovation Of Regular Exits. Road Structure: - Wearing Course Made Of Ac11s Asphalt Concrete, Thickness 4Cm; - Binder Layer Of Ac 16W Asphalt Concrete, Thickness 5Cm; - Corrective Milling To Medium Thickness. 6 Cm - Existing Structure With Asphalt Surface. Structure Of Individual Exits Made Of Asphalt Concrete: - Wearing Course Made Of Ac11s Asphalt Concrete, Thickness. 4 Cm; - Binder Layer Of Ac 16W Asphalt Concrete, Thickness 5Cm; - Corrective Milling To Medium Thickness. 6 Cm - Existing Structure With Asphalt Surface Section In Km 0+000.00 To 0+200.00 - Roadway With A Width Of 5.60 M To 6.10 M Section In Km 0+000.00 To 0+085.16 - Roadway With A Width Of 3.60 M The Detailed Scope Of Works And The Conditions For Their Implementation Are Included In The Design Documentation: A) Technical Specification Of The Execution And Acceptance Of Works; B) Technical Design; C) Illustrative Mapthe Works Should Be Carried Out In Accordance With The Developed Technical Design And In Accordance With Construction Practice And Other Legal Regulations. The Bill Of Quantities Attached To The Specification Is Not An Element Of The Design Documentation, But Constitutes Auxiliary Material For The Use Of: - Determining Minimum Technical Standards And Quality Of Materials And Equipment, - Assessing Whether There Is An Abnormally Low Price. Contractors Are Recommended To Make A Site Visit To Examine The Construction Site And Its Surroundings, And Obtain Other Necessary Information Regarding The Execution Of The Subject Of The Order Before Submitting A Tender. The Quality Of Materials, Products And Elements Delivered For Construction Must Be Consistent With The Standard Requirements, Approvals And Admission Certificates. For Use And The Provisions Of The Detailed Designs And The Requirements Contained In The Swz. The Contractor Will Provide Documents Confirming The Fulfillment Of The Above Conditions To The Ordering Party. The Remuneration Will Be Paid To The Contractor On The Basis Of The Final Invoice Issued After Completion Of The Entire Subject Of The Contract And Final Acceptance.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
