Bids Are Invited For Acquisition Of Furniture Materials To Equip The City Council Of Viçosa Do Ceará

Reception Desk Minimum Specifications: Measuring 1100Mm(H)X1550(W) Minimum: The Top Must Have A Thickness Of 40Mm Or Greater, Made Up Of Mdp On The Top And Mdp Finishes On The Bottom, Covered On Both Sides In Brown With Light And Dark Tones, Finished With Polystyrene Pvc Tape With A Minimum Thickness Of 1Mm With Exposed Edges Headed. Back Of The Tables Made Of Mdp, Measuring: 1250Mm(W) Finished In Pvc Tape (Polystyrene) With A Minimum Thickness Of 0.45 Mm, With The Drawer Body Made Of Galvalume Steel To The Size, With A Sliding System On Rails With A Nylon Pulley, With Handle-Type Polyethylene Handles., Stringer Bench With Three Seats - Minimum Specifications: Stringer Type, Made Of Thick Steel Sheet Minimum 1.5 Mm, With Circular Perforations Of 3.8 Mm In Diameter And Finished In Epoxy Paint In Gray. Predominantly, At Least 30 Mm, Straight Counter Table - Minimum Specifications: With A 50 Mm Thick Top Measuring 1800 Mm Wide And 700 Mm Deep With A Joining Counter Measuring 1200 Mm Wide By 518 Mm Forming An “L” With Total Dimensions Of 750 Mm (H) X 1800Mm(W) X 1700Mm(D); With A Lower Top With 70Mm Molded Finishes In Mdp, Covered On Both Sides In Brown With Light And Dark Tones. Measuring: 1800Mm(W) Rectangular Meeting Room - Minimum Specifications: Top Made Of Mdp Bp (25Mm), Covered On Both Sides By A Decorative Cellulose Sheet Bathed In Melamine Solution Fixed Through A Low Pressure Press Process, In Dark Brown Color According To The Manufacturers Card, Finished With Pvc (Polystyrene) Tape With A Minimum Thickness Of 2Mm With Apparent Headed Edges. Have A Power Box On Your Top: Upper Part Made Of High-Impact Polypropylene, 40Mm High Cabinet - Minimum Specifications: 40Mm Or Higher Tops Made Up Of Mdp On The Upper Part And Mdp Finishes At The Bottom, Fixed Using A Low-Pressure Press Process With A Pvc (Polystyrene) Tape Finish With At Least 1.00Mm Of Thickness. Have Sides, Shelves, Semi-Open Cabinet 40Mm - Minimum Specifications: Tops Of 40Mm Or Higher Composed On The Upper Part In Mdp And Lower Part With Mdp Finishes, Coated On Both Sides In Brown Color With Light And Dark Tones With A Finish In Pvc Tape (Polystyrene) With A Minimum Thickness Of 1.00Mm. They Must Have 2 Lower Doors With The Following Minimum Measurements 650Mm(H)