Winding Type: Out (Color Layer Out). This Is Critically Important, Since In-Winding Ribbons Will Not Print In This Printer. Winding Length: 74 Meters. This Is Standard For Zebra Desktop Printers. Rolls Of 300 Meters Will Not Fit In It. Bushing Diameter: 0.5 Inches (Approx. 12.7 Mm). Also Make Sure That The Sleeve Has Grooves (Slots) On The Sides - They Are Needed To Secure The Tape In The Mechanism. Roll Width: Depends On The Width Of Your Label. Most Often They Take 110 Mm (Maximum Width). If The Labels Are Narrow, You Can Use 60Mm Or 84Mm To Save Money. The Main Rule: The Ribbon Should Be Slightly Wider Than The Label. Material (Print Quality): (Wax): Ideal For Matte Paper Labels (The Most Popular Option). (Resin): If You Are Printing On Plastic (Glossy) Labels That Should Not Rub Off.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
