Task: Renovation Of Building No. 10 (Workshop) In Knw At Ul. Kwiatkowskiego In Elbląg Task Location: Building No. 10 (Workshop) In Knw At Ul. Kwiatkowskiego 15 In Elbląg Characteristic Data The Building Is Currently Used As A Repair Hall For Motor Vehicles. It Is A Detached, Single-Story Building With A Partial Basement, Constructed Using Traditional Industrial Technology. The Building Has A Basement At Two Walls - The Northern And Southern Gables, The Middle Part With Workshops Has No Basement. The Buildings Basement Walls Are Made Of Ceramic Brick. The Structure Of The Part Above Ground, It Is A Steel Structure With A Post-And-Beam Structure With Brick Filling. Roof Structure - Steel Trusses And Girders, Ceramic Flat Roof Based On Steel Beams. Roof Covering Made Of Thermally Welded Felt. The Lintels Over The Garage Doors Are Made Of Prefabricated Reinforced Concrete, And The Lintels Over The Car Ducts Are Made Of Reinforced Concrete. The Building Is Equipped With Electrical, Water And Sewage Installations, Mechanical And Gravity Ventilation, And Central Heating. And Lightning Protection Devices. Facility: Building No. 10 (Workshop) In Knw At Ul. Kwiatkowskiego In Elbląg• Length: 83.50 M• Width: 23.70 M• Height: 7.41- Hmax, 3.69- Hmin• Usable Area - 1978.95 M2the Scope Of Works To Be Performed Includes: 1. Replacing Steel Window Joinery With Pvc Joinery • Cutting The Screws Fastening The Steel Frames,• Forging Steel Window Joinery, • Installing Window Joinery From Pvc Profiles, • Adding Plaster In The Jambs, • Gluing The Mesh Reinforcing The Jambs; • Making External Plaster Of The Jambs, • Painting The Surfaces Of The Jambs 2. Replacing The Steel Joinery Of The Roof Fanlights With Aluminum Joinery, • Cutting The Screws Fastening The Steel Frames, • Forging The Steel Window Joinery, • Installing The Joinery From Aluminum Profiles, • Cleaning The Steel Structure To Which The Joinery Is Attached, • Preparing The Surface Of The Steel Structure Around The Replaced Fanlights For Painting, • Painting The Surface Of The Steel Structure Paint For Metal 3. Replacement Of Steel Door Joinery With Aluminum Joinery • Cutting The Screws Fastening The Steel Door Frames, • Forging Out The Steel Door Joinery, • Mounting The Door Joinery With Aluminum Profiles, • Adding Plasters In The Jambs, • Gluing The Mesh Reinforcing The Jambs; • Applying Thin-Layer Plaster On The Jambs, • Painting The Surfaces Of The Jambs, • Cutting Concrete In The Thresholds, • Mechanical Dismantling Of The Concrete Surface At The Entrances/Driveways, • Manual Dismantling Of The Substructure From The Ground, • A Base Of Compacted Loose Materials, • Placing The Concrete Mass In The Places After Demolishing (Concrete C30/37) • Removing The Rubble From The Area With Self-Dumping Vehicles Construction 4. Renovation Of The Roof Covering• Disassembly Of Gutters Made Of Unusable Sheet Metal, • Dismantling Of Downpipes Made Of Unusable Sheet Metal, • Disassembly Of Gutter Hooks, • Dismantling Of D
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
