Quotation Are Invited For Rising Spindle Dn200 Rsv

Quotation are invited for Rising Spindle Dn200 Rsv Delivery Date: 2026/06/30 Delivery To: Electricity - Steenbras P S RED1 Plant / PH: 840 4102 Delivery Address: 1 Off Sir Lowry Road, Gordons Bay Closing Date: 2026/05/20 Closing Time: 04:00 PM Description: 10 each x rising spindle dn200 rsv 8 each x rising spindle dn80 rsv 4 each x swing check valve dn50 4 each x swing check valve dn80 8 each x swing check valve dn150 Specification: * Supply and delivery of RSV Valves and swing check valves: *******If Flange to Flange lenght cannot be maintained on RSV and NRVs a spacer must be incorporated to make up Lenght*********** * Sizes as follow: Swing Check NRV Swing Check Valves DN50 Flange to flange Length: 235mm 4Hole flange Flange Diameter: 170mm PCD: 125 DN80 Type: Swing Check Valve Flange to flange Length: 308mm 4Hole flange Flange Diameter: 200mm PCD: 160mm DN150 Type: Swing Check Valve Flange to flange Length: 445mm 8Hole flange Flange Diameter: 285mm PCD: 240mm Rising Spindle RSV: DN200 PN16 Type: rising Spindle Flange to Flange length: 295mm 8 hole flange Flange diameter:340 PCD:295 DN80 PN16 Type: rising Spindle Flange to Flange length:203 Flange Diamter: 170mm PCD:160 * IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. GUIDELINE: Wherever reference is made to any Trademark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the suppliers commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. * Please call Trevor Farmer, liezl carolus or yusuf majiet Before delivery takes place on 021 814 1874/5 EXT 238 * Delivery address: Steenbras Powerstation 1 Hydro road Gordons bay 7140 Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/320839

Refer document

FileName	File Description
Global Tender Document	68b15ba4-7ee2-4cd6-814b-735966377a48.html