Request For Quotation Game Room Furniture

Light Table -Height 450Mm, Width 500Mm, Depth 800Mm. Design: Type: Sensory Development Table. Конструкция Должна Обеспечивать: Свободный Доступ Ребёнка, Устойчивость Без Крепления К Стене. Main Material: First Grade Laminated Chipboard: Body: 16 Mm, Partitions: At Least 16 Mm. Density: Not Less Than 650 Kg/M? . Emission Class: E1 Or Better. Coating: Wear-Resistant, Resistant To Wet Cleaning. Кромка: Материал: Пвх .Толщина: Внешние Элементы: 2 Мм,Внутренние Элементы: Не Менее 1 Мм . Safety: Rounding Of All External Corners: R Not Less Than 3 Mm. No Sharp Edges Or Burrs. Rollover Resistance. Materials Safe For Children (Confirmed By Documents). Квалификационные Требования К Поставщику: Опыт Поставки Аналогичной Мебели, Подтверждение Выполненных Контрактов, Наличие Производственных Мощностей Или Договора С Производителем, The Easlet Is Coated With Oil. Height 1100Mm, Width 600Mm, Depth 600Mm - 1. Materials And Environmental Safety: Base: Aviation Birch Plywood (Gost 102-75) Or Grade 1/1 (Extra). The Use Of Knots, Patches Or Changes In Veneer Color Is Not Permitted. Emission Class: Strictly E0 Or E0.5 (Formaldehyde Content $\Leq 0.05$ Mg/M³), Which Must Be Confirmed By Laboratory Test Reports According To The Uni En 13986 Standard. Material Moisture Content: Strictly In The Range Of 6–8% At The Time Of Assembly To Prevent Deformation. 2. Premium Coating (Multilayer System). To Ensure Maximum Safety In Contact With Saliva And Sweat (Standard Din 53160), The Coating Should Consist Of: Primer Layer: Natural Oil With Hard Wax (Hardwax-Oil). Finish Layer: Two-Component Water-Based Acrylic Varnish With An Ultra-Matt Effect (No More Than 5% Gloss). The Varnish Must Have Zero Voc Content And Be Resistant To Chemical Disinfectants. 3. Design Requirements (Montessori Methodology). Ergonomics: The Height Of The Rack Must Strictly Correspond To The Height Of A Child 2–4 Years Old To Ensure A “Zone Of Actual Development” And Independent Access To Materials. Safety (Zero-Edge): All External Edges Must Have A Radius (R) Of Strictly 3 Mm, Made On A Cnc Milling Machine. Manual Grinding Is Not Allowed To Avoid Breaking The Geometry. Hidden Installation: The Use Of Visible Fasteners (Confirmations, Plugs) Is Prohibited. The Connection Of Parts Must Be Made In A Hidden Way (Eccentric Ties Or Dowels With D3 Class Glue).4. Roughness: The Surface Under The Varnish Must Have An Rm Value Of No More Than 20 Microns.5., Table For 4 Children - 5 Years Old Height 520Mm, Length 800Mm, Width 600Mm. Tabletop. Material: First Grade Laminated Chipboard, Without Recycled Materials. Density: Not Less Than 650 Kg/M? . Emission Class: E1. Surface: Matte, Anti-Reflective, Abrasion Resistant (Not Lower Than Ac3). Ножки: Материал: Берёзовая Фанера Сорт 2/2 ,Толщина: 12 Мм (Контроль Фактической Толщины) , Влажность: 6-10%, Многоступенчатая Шлифовка (Не Грубее P180, Экологичный Лак/Масло На Водной Основе. Тип Соединений: Скрытые Металлические Крепления, Исключение Видимых Саморезов С Лицевой Стороны, Отклонение По Горизонтали Не Более 1 Мм. Безопасность:Скругление Всех Углов: R Не Менее 3 Мм . Отсутствие Острых Кромок И Заусенцев. Покрытия Без Токсичных Испарений . Соответствие Требованиям Детской Мебели (Подтверждение Документы. Опыт Поставок Аналогичной Мебели - Подтвердить Договорами, Наличие Собственного Производства Или Контракта С Производством, Образец Изделия По Требованию Заказчика, .Touch Table Is Coated With Oil. 600*1150*420- 1. Materials And Environmental Safety: Base: Aviation Birch Plywood (Gost 102-75) Or Grade 1/1 (Extra). The Use Of Knots, Patches Or Changes In Veneer Color Is Not Permitted. Emission Class: Strictly E0 Or E0.5 (Formaldehyde Content $\Leq 0.05$ Mg/M³), Which Must Be Confirmed By Laboratory Test Reports According To The Uni En 13986 Standard. Material Moisture Content: Strictly In The Range Of 6–8% At The Time Of Assembly To Prevent Deformation. 2. Premium Coating (Multilayer System). To Ensure Maximum Safety In Contact With Saliva And Sweat (Standard Din 53160), The Coating Should Consist Of: Primer Layer: Natural Oil With Hard Wax (Hardwax-Oil). Finish Layer: Two-Component Water-Based Acrylic Varnish With An Ultra-Matt Effect (No More Than 5% Gloss). The Varnish Must Have Zero Voc Content And Be Resistant To Chemical Disinfectants. 3. Design Requirements (Montessori Methodology). Ergonomics: The Height Of The Rack Must Strictly Correspond To The Height Of A Child 2–4 Years Old To Ensure A “Zone Of Actual Development” And Independent Access To Materials. Safety (Zero-Edge): All External Edges Must Have A Radius (R) Of Strictly 3 Mm, Made On A Cnc Milling Machine. Manual Grinding Is Not Allowed To Avoid Breaking The Geometry. Hidden Installation: The Use Of Visible Fasteners (Confirmations, Plugs) Is Prohibited. The Connection Of Parts Must Be Made In A Hidden Way (Eccentric Ties Or Dowels With D3 Class Glue).4. Roughness: The Surface Under The Varnish Must Have An Rm Value Of No More Than 20 Microns.5.