Bids Are Invited For Hiring A Company To Supply Led Luminaires And Pole Arms To Maintain Public Lighting, Meeting The Needs Of The Urban Planning Department.

Public Lighting Arm, Copel Standard, Hot Galvanized Type Sae 1010/1020, Sheet Thickness Of At Least 2.5Mm, Diameter Of 45Mm To 49Mm, Curved (Swan), Length Of 2M To 2.10M, With Fixing Shoe With Two Adjustable Holes., Led Luminaire (100W):- Minimum Nominal Power Of 90W And Maximum Of 100W; - Automatic Bivolt Voltage 127V/220V;- Minimum Luminous Flux Of 11,000 Lumens;- Luminous Radiation Angle 80°X150°;- Minimum Luminous Efficiency Of 110 Lumens / W;- Minimum Color Reproduction Index (Irc) Of 70%;- Correlated Color Temperature (Tcc) From 4500K To 5000K;- Minimum Power Factor Of 0.95;- Useful Life Expectancy Of At Least 50,000H For L80;- Maximum Total Harmonic Distortion (Thd) Of 10%;- Smd Type Led Technology - Surface Mount Device Or Cob;- Type Ii Transverse Luminous Distribution, Medium And/Or Short Longitudinal And Limited Or Fully Limited Light Distribution Control, In Accordance With Nbr 5101;- High Pressure Injected Aluminum Body With Gray Epoxy Paint Or Extruded Body;- For Installation On Public Lighting Poles And/Or Arms With A Diameter Of 48.5Mm To 60.3Mm, With Fixing Performed By Screws Made Of Stainless Steel;- Impact Protection Index Of At Least Ik08- With Electronic Controller For Led Modules (Driver) Housed (Internal) To The Body Of The Luminaire;- Optical Assembly Formed By Modular Sets;- With Socket And Photoelectric Relay (With 5 Year Warranty) Compatible With The Luminaire According To Nbr 5123 Incorporated Into The Body Of The Luminaire;- Protection Index Against Dust And Water Penetration Ip 66 For The Optical Assembly And Driver Compartment;- 10 Year Luminaire Warranty.