Bids Are Invited For Acquisition Of Automation Equipment

Photovoltaic Solar Panel 12V 60W • Power = 60 Watts • Certification = Inmetro • Seal = Procel Class A • Use = Off-Grid System • Maximum Power Voltage (Vmp) = Above 18 V • Maximum Power Current (Imp) = Above 3.2 A • Open Circuit Voltage (Voc) = Above 21 V • Current Short Circuit (Isc) = Above 3.4 A • Module Efficiency = Above 12% • Material = Polycrystalline Silicon, Discharge Resistor 3X120kω In ∆ (≥ 7.5Kvar), Central Processing Unit: Altus Reference: Nx3004 Cpu Technical Characteristics: 32 Kbytes Of %I Points And 32 Kbytes Of %Q7 Points, 5 Kbytes Of Retentive Or Persistent Memory32-Bit High-Speed Processingfloating-Point Unit1 Serial Port1 Front-Panel Ethernet Interfaceadvanced Diagnostic Servicessystem Message Logopc Protocols Da/Ua, Profinet, Snmp And Ether- Net/Ips Clock Synchronization Via Sntpre-Requisites 15Wone Touch Diag Integrated Power Supply Web Servercompliance With International Standard Iec 61131-3Real Time Clock (Rtc), Rack:Altus Reference: Nx9001technical Characteristics:12 Mounting Positionsdegree Of Protection Ip20compliance With International Standard Iec 61131-3Dimensions (W X H X D) 236, 1 X 119 Nx1001technical Characteristics:16 Isolated Digital Inputs At 24Vdc4 Independent Input Groups Configurable As Source Or Sinkhigh Speed 20Khz Internal Countersdisplay For Indication Of Input Status And Diagnosticsone Touch Diag, Digital Output Module:Altus Reference: Nx2001technical Characteristics:16 Transistor Digital Outputs 24Vdc2 Groups Of Isolated Outputsdiagnostics And Short-Circuit Protection At The Outputsprotection Against Polarity Reversal In The External Supplylow Voltage Diagnosis Of The External Supplydisplay For Indicating The Status Of The Outputs And Diagnosticsone Touch Diag, Analog Input Module:Altus Reference: Nx6000technical Characteristics:8 Inputs In 16 Bitsinput In Voltage 0-10Vccentered In Current 4-20Moregalvanic Isolation Between Inputs And Internal Logicvoltage Surge Protectionopen Loop Diagnosisover And Under Range Value Diagnosisdisplay For Module Diagnostics And Input Status Indicationone Touch Diag, Analog Output Module:Altus Reference: Nx6100technical Characteristics:4 16-Bit Outputsvoltage Output 0-10Vdccurrent Output 4-20Moregalvanic Isolation Between Outputs And Internal Logicprotection Against Voltage Surge And Polarity Reversalshort-Circuit Diagnosis And Open Circuitdisplay For Module Diagnostics And Input Status Indicationone Touch Diag, Human-Machine Interfacealtus Reference: X2 Base 5 V2screen Size 5” Resolution 800 108, 95 X 37 Mm, Human-Machine Interfacealtus Reference: 2 Ports Rs-485Dimensions (W X H X D) 202 X 152 X 37 Mm, Central Processing Unit Reference