Bids Are Invited For Acquisition Of Food, Friday And Round Tables For Municipal Cmeis

Feeding Table For Nursery With 5 Seats. Reiflex Uni 2, 00 1,200, 00 2,400, 00 Structure With Feet In Steel Tube 1 ½ (Wall 1, 50). Sides With 1 ¼ Tube (Wall1, 50) With Double Busbar. Upper Beam Made Of 1 ¼ Tube (Wall 1, 50) To Support The Worktop. This Horizontal Lock In 1/1/4 Steel Tube (Wall 1, 50) To Join The Sides Of The Table. Closing Of The Tops And Shoes With Injected Tips In Orange Color, Fixed Through Fittings And Riveted To The Structure Using 4.8 Welding Should Have A Smooth And Homogeneous Surface, And Should Not Present Sharp Points. Painting By Epoxy Powder System. Top (1800 Mm 20 Mm Curvature In Beige Color. The Top Has Built-In American Bushings Prepared To Receive The 1/4 X 43 Mm Screws That Will Fix It To The Structure And The Support Base For The Shells. (Seat) Conf Ected In Plastic Resin In Usable Area Dimensions (Width 280 Mm On The Back Of The Backrest There Are Two Injected Protrusions (Ribs) To Guarantee Greater Resistance, Accompanied By Upholstered Protection In Eva Material And Equipped With A Seat Belt That Allows Removal For Cleaning. The Nursery Feeding Table With 5 Seats Dev And Has Support Bases For The Shells Are Made Of ¾ Steel Tube (Wall 1, 06) Where The Shells Will Be F I..., Hexagonal Infant Set. Composed Of 06 Tables, 06 Chairs And 01 Central Table. Table: Childrens School Table With Simplified Size And Which Allows It To Be Used As An Childrens Toy. It Comprises A Structural Body, A Book Holder And A Substantially Trapezoidal Top. The Central Table Has 6 Central Hexagonal Cavities, Side By Side With Cup Holders. Emu, V Facing Inwards, Two Rear Feet Also U-Shaped, Facing Towards The Front And Smoothly Arched, Upper And Lower Crossbars Connecting The Front Feet To The Rear Feet. The Top Has A Substantially Trapezoidal Shape And Is Molded Using An Injection Process With Material Called Abs, But With A Smaller Rounded Base And Chamfers At The Ends Of The Larger Bases. A Transverse Groove, Positioned Next To The Smaller Base Of The Top, Is Designed To Hold Objects. The Portaliv Ro Presents The Shape Of A Triangular Plate And Is Molded Using An Injection Process With A Material Called Polypropylene Copolymer, With A Rounded Frontal Vertex, Being Fitted To Rails Located On The Internal Surfaces Of The Upper Beams Of The Body And Being Fixed By Means Of Protruding Pins That Protrude From The Plate And Penetrate Into An Orifice. Tops Of The Upper Crossbeams. Inf Antil Chair