Bids Are Invited For Acquisition Of Dental Compressors And Vacuum Pump, As Requested By The Municipal Health Department

Dental Compressor: Oil-Free, Suitable For Use In Healthcare Services, And Must Present, At A Minimum, The Following Technical Characteristics: Minimum Power Of 3 Hp; 220V Electrical Supply – Single-Phase; Approximate Rotation Of 1,680 Rpm; Minimum Flow Rate Of 400 Liters/Minute; Minimum Maximum Pressure Of 8 Bar (120 Psi); Approximate Maximum Noise Level Of 60 Db(A); Air Reservoir With A Minimum Capacity Of 50 Liters, With Internal And External Anti-Corrosive Painting; Air Suction Filter; Pressure Switch With General On/Off Switch; Engine Ventilation System; Safety Valve; Solenoid Valve To Relieve Excess Pressure; Reservoir Pressure Gauge; Air Outlet Pressure Regulator With Manometer; Manual Drain With Quick Registration; Acoustic Protection Box With Internal Insulation; Manufactured In Accordance With Current Standards Nr-12 And Nr-13; Reservoir Certified By Inmetro (Compulsory Seal); Product Exempt From Registration With Anvisa, According To Current Legislation., Dental Vacuum Pump: Suitable For Service From 01 To 04 Dental Offices, Compatible With Simultaneous Use, At Minimum The Following Features: Activation System By Contactor Key; Electric Motor With Minimum Power Of 1.0 Hp; Bivolt Electric Voltage (110-127 / 220-254V); Minimum Maximum Vacuum Of 550 Mmhg; Minimum Flow Rate Of 400 Liters/Minute; Maximum Energy Consumption Approximately 1.26 Kw; Maximum Water Consumption 0.35 Liters/Minute; Noise Dampening System Suitable For The Clinical Environment; Debris Collector Filter At The Pump Inlet, With Automatic Washing And Waste Disposal System, Guaranteeing Biosafety; Water Consumption Control Valve; Hose And Adapters Required For Installation Included; Possibility Of Internal Or External Installation; Cabinet Made Of Resistant, Easy-To-Clean Material; Equipment Suitable For Dental Use, Meeting Current Technical Standards