Quotation are invited for Jersey;Vn;Traf Blue;Xs;Acry;Mil Delivery Date: 2026/05/25 Delivery To: Law Enforcement Store Law Enforcement Store Delivery Address: 5 Hopkins sytreet, Parow Closing Date: 2026/05/21 Closing Time: 04:00 PM Description: 30 each x jersey;vn;traf blue;xs;acry;mil Specification: * JERSEY;VN;Traf Blue;XS;Acry;Mil lue; SIZE: XSmall; MATERIAL: ilitary; SPECIFICATIONS: Jersey with inset sleeves, epaulettes, elbow patches and double welt and cuffs. The body of the jersey will be knitted in two parts, that are seamed at the sides and shoulders. Each shoulder tab to be stayed with stay tape.The welt on back and front to be double and blindstitched on inside with polyfil 80 in matching colour. End of over lock seams to be bar tacked. Sleeves seams under arm and tapered to the cuff, sleeves to have a double cuff blindstiched as in body. V/Neck to be mock- linked and hand worked. Mock - lining to be done with polyfil 80. Knitted Structure Mass per unit a minimum 345g/m2. Body and sleeves: 1:1 Rib, V/neck band: 1:1 Rib, Cuffs and Welt: 2:1 Rib, Wales per 10cm: +/-356. Colour fastness to light to be as per normal commercially acceptable standard. Colour Fastness to Washing as per normal commercially acceptable standards; GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". QUOTATION CODITIONS CLAUSE - 2.14.1 &`QUOTATION CONDITIONS 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive.PIPE CUTTER;Copper;15 - 25 mm #Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent" #NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. ALSO ENSURE THAT YOUR UPDATED DECLARATION OF INTEREST AND BBBEE IS ATTACHED AT ALL TIMES*** Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/320560
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
