Analog Or Digital Ammeter For Mounting On An Electrical Panel, Intended For Measuring Electrical Current In Single-Phase Or Three-Phase Systems, With Scale Compatible With The Circuit, Direct Supply Or By Current Transformer, Body In Insulating Material, Minimum Degree Of Protection Ip-40, Suitable For Use In Submerged Pump Control Panels., Submerged Centrifugal Pump, Fine Stage, Nominal Diameter Of 4 Inches, Power Compatible With 1.0 Hp Motor, Discharge Of 1.1/2 Inches, Made Of Stainless Steel Or Equivalent Anticorrosive Material, Suitable For Deep Tubular Wells, For Pumping Clean Water., Multe Stage Submerged Centrifugal Pump, Nominal Diameter Of 4 Inches, Made Of Stainless Steel Or Equivalent Corrosion Resistant Material, Suitable For Operation In Deep Tubular Wells, Compatible With Market Standard Submerged Motors., Multi-Stage Centrifugal Pump, Diameter 4 Inches, 5 Hp, Discharge 1.1/2 Inches, Stainless Steel Body Or Equivalent Anticorrosive Material, Suitable For Pumping Clean Water In Artesian Wells., Power Compatible With 2-Inch Motor, Corrosion-Resistant, Suitable For Deep Tubular Wells., 05/08/2026 - 16:45:08, Power Compatible With 3-Inch Motor, Suitable For Water Collection In Deep Tubular Wells., Multi-Stage Submerged Centrifugal Pump, 2-Inch Boost, Suitable For Pumping Systems In Deep Wells., Hydraulic Reduction Bushing Type Connection, Made Of Sturdy Metal, With Standard Thread, Used For Adaptation Between 1.5 Inch And 1 Inch Pipes, Guaranteeing Sealing And Continuity Of Flow In Hydraulic Systems., Metallic Hydraulic Reduction Bushing Connection, With Compatible Threads, Intended For The Interconnection Of Pipelines 1 Inch And 1 1/4 Inch, Ensuring Efficient Sealing And Secure Connection., Metal Reduction Bushing Type Hydraulic Connection, Used For Adaptation Between 2 Inch And 1.5 Inch Pipes, Ensuring Adequate Sealing And Continuity Of The Hydraulic System., Flexible Electrical Cable Type Pp, With Two Copper Conductors Electrolytic, Nominal Section Of 2.5 Mm², Pvc Insulation, Minimum Nominal Voltage Of 750 V, Suitable For Electrical Supply Of Submersible Pumps And Electrical Equipment., With Three Copper Conductors, Nominal Section Of 1, Suitable For Electrical Installations Of Equipment And Controls., Nominal Section Of 6 Mm², Suitable For Powering Motors Submerged Electrical., Electrolytic Starting Capacitor, Capacitance Range Between 270 And 324 Microfarads, Minimum Nominal Voltage Of 250 V, Used To Start Single-Phase Electric Motors Of Submerged Pumps., Permanent Capacitor For Electric Motors, Capacitance Of 25 Microfarads, Continuous Use., Permanent Capacitor With Capacitance Of 50 Microfarads, Used In Single-Phase Motors., Automatic Level Control Device (Automatic Float Switch), Operating Voltage 220 V, Used For Automatic Activation Or Shutdown Of Pumps According To Water Level., Electric Manual Or Automatic Activation Switch (On/Off Switch), Suitable For Use In Pump Control Panels, Voltage Compatible With The System., Set Composed Of Multi-Stage Submerged Centrifugal Pump And Submerged Electric Motor, Nominal Power Of 2 Hp, Supply Voltage 220 V, Single-Phase System, Suitable For Installation In Deep Tubular Wells, Intended For Pumping Clean Water. Engine With