Bids Are Invited For The Object Of This Tender Is The Acquisition Of Materials And Equipment, In Accordance With The Conditions, Quantities And Requirements Established In The Preliminary Technical Study/Term Of Reference And Notice.

Acquisition Of A Professional Gasoline Side Brushcutter - Technical Specifications:1. General Characteristics: New Professional Side Brush Cutter, Gasoline, Equipped With A 2-Stroke Engine With 2-Mix Technology, Characterized By High Energy Efficiency, Providing A Reduction In Fuel Consumption By 20% And A Reduction In Harmful Emissions By More Than 80% When Compared To Conventional Two-Stroke Engines.2. Minimum Technical Specifications:- Minimum Displacement: 41.6 Cc;- Minimum Power: 2.0 Kw / 2.7 Vc;- Type Of Transmission Shaft: Rigid, With Reinforced Rod;- Minimum Fuel Tank Capacity: 750 Ml;- Cutting Tool: - Nylon Head Type Trimcut C 42-2 Or Equivalent;- Minimum Cutting Diameter: 420 Mm;- Maximum Weight (Without Fuel And Without Cutting Set) 8.8 Kg;- Total Length (Without Cutting Tool): Approximately 177.5 Cm;- Sound Power Level: Greater Than Or Equal To 111 Db(A).3. Minimum Mandatory Accessories The Brushcutter Must Be Supplied Accompanied By The Following..., Acquisition Of A Professional Gasoline Side Brushcutter - Technical Specifications: 1. General Features: New Professional Side Brushcutter, Equipped With 2-Stroke Engine With 2-Mix Technology, Characterized By High Energy Efficiency, Providing Reduction In Fuel Consumption By 20% And Reduction Of Harmful Emissions By More Than 80% When Compared To Conventional Two-Stroke Engines. 2. Minimum Technical Specifications: - Minimum Displacement: 41.6 Cc; - Minimum Power: 2.7 Vc; - Type Of Transmission Shaft: Rigid, With Reinforced Rod; - Minimum Fuel Tank Capacity: 750 Ml; - Cutting Tool: - Nylon Head Type Trimcut C 42-2 Or Equivalent;, Acquisition Of Professional Gasoline Side Brushcutter – Technical Specifications1. General Features New Professional Side Brush Cutter, Providing A Reduction In Fuel Consumption By Up To 20% And A Reduction In Harmful Emissions By More Than 80% When Compared To Conventional Two-Stroke Engines.2. Minimum Technical Specifications•Minimum Displacement: 41.6 Cc;•Minimum Power: 2.0 Kw / 2.7 Cv;•Type Of Transmission Shaft: Rigid, With Re-Forced Rod;•Minimum Fuel Tank Capacity: 750 Ml;•Cutting Tools:Trimcut C Type Nylon Head 42-2 Or Equivalent;• Minimum Cutting Diameter: 420 Mm; 25R$ 91,865, 000State Of Rio Grande Do Sulmunicipality Of Osóriosecretary Of Administrationpurchasing And Tenders Sector2 | 20Av. Jorge Dariva Nº 1251 – Centro - 95520-000 Osório-Rstel. (51) 3663-8268 L E-Mail [email protected]_Redência_Contatacao_Direta_Bens_V-180725.Item Specification Unit. Qty. Unit Value. Vl. Total3. Minimum Mandatory Accessories The Brush Cutter Must Be Supplied Accompanied By The Following Items: • 01 Vest-Type Support Belt; Warranty Minimum Warranty Of 12 (Twelve) Months Against Manufacturing Defects.5. Quality Reference Equipment Of Equal Or Higher Quality To The Stihl Brand Fs 291 Model, ..., Acquisition Of A Professional Chainsaw – Minimum Technical Specifications1. Motose General Characteristics