Tenders Are Invited For Heat Pumps – Design, Delivery, Assembly And Commissioning Of 2 Photovoltaic Installations, 2 Energy Storage Units And 1 Heat Pump – Part Ii

Heat Pumps – Design, Delivery, Assembly And Commissioning Of 2 Photovoltaic Installations, 2 Energy Storage Units And 1 Heat Pump – Part Ii. Renewable Energy Infrastructure In The Widawa Commune - Design, Delivery, Assembly And Commissioning Of 2 Photovoltaic Installations, 2 Energy Storage Facilities And 1 Heat Pump The Subject Of The Order Is The Design, Delivery, Assembly And Commissioning Of 1 Set Of A Brand New Heat Pump Installation; 2 Sets Of Brand New Photovoltaic Installations And 2 Energy Storage Facilities In Selected Public Buildings In The Widawa Commune With The Power Indicated In The List Constituting Appendix No. 1B To The Swz. The Scope Of The Order Includes: 1) Design Of: A) 1 Set Of Air Heat Pump Installations With A Minimum Power Of 200 Kw, Including A Hybrid Installation, I.E. A Fuel Oil Heat Source Owned By The User And A Design For Integration Into The Existing Heating Installation Of The Building; B) 2 Sets Of Photovoltaic Installations With A Minimum Power Of 11 Kwp And 50 Kwp, Mounted On Buildings Or Ground, With A Structure Adapted To The Installation Site, Including One Installation (With A Power Of 50 Kwp) Using Bifacial Photovoltaic Cells; C) 2 Sets Of Energy Storage Units With Parameters Of 9 Kwh And 40 Kwh. 2) Delivery And Installation Of: A) 1 Set Of Air Heat Pump Installations With A Minimum Power Of 200 Kw, Including A Hybrid Installation, I.E. A Fuel Oil Heat Source Owned By The User And A Project For Integration Into The Existing Heating Installation Of The Building, B) 2 Sets Of Photovoltaic Installations With A Minimum Power Of 11 Kwp And 50 Kwp, Mounted On Buildings Or Ground, With A Structure Adapted To The Installation Site; Including One Installation (With A Capacity Of 50 Kwp) Using Bifacial Photovoltaic Cells, C) 2 Sets Of Energy Storage Units With Parameters Of 9 Kwh And 40 Kwh, Including: Installation Of Air Heat Pumps With Technological Devices, Including A Domestic Hot Water Tank, Security Features, Integration Into The Existing Heating System Adapted By The Contractor, Installation Of Pv Cells With A Supporting Structure, Installation Of An Inverter, Installation Direct And Alternating Current, Protection Against Electric Shock, Overvoltage, Installation Of Grounding And Equipotential Bonding, Integration Into The Users Existing Installation, Installation Of An Energy Storage Facility; Carrying Out Tests, Examinations And Commissioning Of All The Above-Mentioned Installations. 3) Training Users In The Principles Of Operation Of The Above-Mentioned Installation, Along With Developing Detailed Instructions For Operating The Installation. 4) Preparation Of Registration Documentation For Each Installation, Within The Scope Of The Applicable Connection Procedure, In Accordance With The Principles Specified By The Relevant Distribution System Operator.