Bids Are Invited For Opening Of The Bidding Process For The Acquisition Of Road Signaling Materials – Common Engineering Services And Acquisition Of Materials Or Inputs.

Plate Made Of #18 Hot-Dip Galvanized Steel, With A Standard In Accordance With Abnt Nbr 11904. Dimensions Of 0.50M X 0.50M With Rounded Corners, When Necessary. The Plate Must Be Drilled And Screwed, With A Distance Between Holes Of 33Cm. It Must Have Type Iii Q Retroreflective Adhesive Films, Hot-Dip Galvanized Steel Tube With A 3.75 Mm Wall And Fins On The Bottom. Tube With A Diameter Of 3 And A Length Of 4.5 M. With Drilling Details To Be Defined Upon Request., 60M X 0.80M With Rounded Corners, With A Distance Between Holes Of 33Cm. It Must Have Type Iii Retroreflective Adhesive Films, A Hot-Dip Galvanized Steel Tube With A 2.35 Mm Wall And Fins On The Bottom. Tube With A Diameter Of 2¹/² And Length 3, With A Standard In Accordance With Abnt Nbr 11904. It Must Have Type Iii Retroreflective Adhesive Films That Comply With Abnt Nbr 14644. The Back Of The Sheet Will Be Coated With Matte Epoxy Paint In Black And The Front Will Also Be Made Of Reflective Adhesive Film. As, 04/23/2026 - 08:50:41, 04/23/2026 - 08:50:42, 05/05/2026 - 10:21:02, 35 Mm And Fins On The Bottom. Tube With A Diameter Of 2 And A Length Of 3M. Perforated Tube (8.5Mm Holes), With A Distance Between Holes Of 33Cm And A Hole Greater Than 5Cm From The End., With A Standard In Accordance With Abnt Nbr 11904. Octagonal Shape, With A Side Of 0.25M. The Plate Must Be Drilled And Screwed, With A Distance Between Holes Of 33Cm. Must Have Type Iii Retroreflective Adhesive Films That Meet Abnt Nbr 14644, Applied, 40M X 0.60M With Rounded Corners, 30M. The Plate Must Be Drilled And Screwed, With A Standard In Accordance With Abnt Nbr 11904. Circular Shape, With A Diameter Of 0.50 M. The Plate Must Be Drilled And With Screws, Apl, Single-Component Bucket Methyl Methacrylate-Based Paint For Horizontal Signage, In White (Code Munsell N 9, 5), In Accordance With The Specifications Of The Cet-Et-Sh-14 Standard. Approximately 18-Liter Bucket, Methyl Methacrylate-Based Paint 18-Liter Single-Component Bucket For Horizontal Signage, In Yellow, Single-Component Methyl Methacrylate-Based Paint For Horizontal Signage, In Red (Code Munsell 7, 5 R4 / 14), As Per Cet-Et-Sh-14 Standard Specifications. Bucket Of Approx. Road), Meeting Current Standards, 18-Liter Bucket, Bidirectional Reflective Tack With Body Made Of Resin, In White And Retro-Reflective Lens In Red And Crystal, With Length Of 74 To 110 Mm, Width Of 96 To 130 Mm, Height Of 17 To 22 Mm, With Pin For Fixing, In Accordance With Abnt Nbr 14636., Type Ii Boundary Cylinder, In Accordance With Abnt Nbr 16658, Color To Be Defined At The Time Of Order., In Yellow Color And Retroreflective Lens In Yellow Color, Glue For Tacks, Tacks And Segregators With Catalysts., Monodirectional Reflective Tack With Body Made Of Resin, In White Color And Retroreflective Lens In Color Crystal, Monodirectional Reflective Tack With Body Made Of Resin, And Retroreflective Lenses, The Last With Colors To Be Defined At The Time Of Order, With A Length Of 150Mm, Width Of 250Mm And Height Of 47Mm With Two Pins For Fixing, In Accordance With Abnt Nbr 15576., Bidirectional Reflective Tack With