Request For Quotation 01. Pump. Liquid Limit Sensor (- 387).(Service 367)

Iae. Conductometric Level Sensor Designed For Signaling The Maximum Level Of Electrically Conductive Liquids In Containers And Reservoirs. The Temperature Of The Working Environment Is Not More Than 100 Degrees Celsius And The Pressure Of The Measured Medium Is Not More Than 0.1 Mpa. The Insulator Material Is Plastic, The Connecting Dimensions Are M20×1.5 Mm. Gost 28725-90. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: Multi-Electrode Conductometric Level Sensor. The Number Of Electrodes Is At Least 4, The Length Of The Electrodes Is At Least 1.95 Meters. Electrode Material: Stainless Steel. The Material Of The Separation Plates Is Plastic. The Maximum Operating Temperature Is Not Less Than 85 Degrees Celsius. Used To Monitor Liquid Levels In Open Tanks With Walls Made Of Insulating Material. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics: The Rod (Electrode) For A Conductometric Level Sensor With A Length Of At Least 0.5 M Is A Replaceable Stainless Steel Electrode. Certificate., Iae. The Surface Pump Is A Monoblock, Horizontal Centrifugal Pump With An Open Impeller. Maximum Productivity Is Not Less Than 18 M3/Hour. Maximum Pressure Is Not Less Than 18 M. Pump Power Is Not Less Than 0.55 Kw. Rotation Speed 2900 Rpm. The Manometric Maximum Suction Height Is Not Less Than 7 M. The Temperature Of The Pumped Liquid Is From -10 To +90 Degrees Celsius. The Ambient Temperature During Operation Is From 0 To +40 Degrees Celsius. Maximum Operating Pressure Is Not Less Than 6 Bar. The Engine Is Designed For Long-Term Continuous Operation (Mode S1). The Housing, Cover, Impeller, And Drive Shaft Of The Pump Are Made Of Stainless Steel. Threaded Pipes With Dn-40 Mm. The Mechanical Seal Of The Pump Consists Of Ceramic, Graphite And Viton (Ar-14). Electric Motor: Three-Phase 220/380 V - 50 Hz. Energy Efficiency Class Not Lower Than Ie3. The Insulation Of The Pump Is Not Lower Than Class F. The Degree Of Protection Of The Pump Is Not Lower Than Ip X4. Weight No More Than 13 Kg. Gost 22247-96. Passport/Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate., Iae. Circulation Pump With A Wet Rotor, Designed For Pumping Water In Heating, Cooling And Circulation Systems; Power Supply 220-230 V, Power Not Less Than 0.096 W And Not More Than 0.1 Kw, Adjustable By 3-Stage Speed, Maximum Capacity Not Less Than 4 M3/H (63 L/Min) And Maximum Pressure Not Less Than 6 M, Permissible Range Of Ambient Temperatures From -10 Degrees Celsius To +110 Degrees Celsius, Maximum Operating Pressure Not Less Than 10 Bar, Cast Iron Body, Impeller Made Of Composite Material, Shaft Made Of Stainless Steel, Bearings Made Of Metal Carbon, Degree Of Protection Of The Electric Motor Is Not Lower Than Ip44. Installation Length Is Not Less Than 130 Mm With The Possibility Of Increasing To Not Less Than 180 Mm. Gost Iec 60335-2-51-2012. Passport/Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate., Iae. Submersible Drainage Pump For Clean Or Slightly Contaminated Water With A Power Supply Of 220 V, A Power Of At Least 0.37 Kw, A Maximum Productivity Of At Least 7 M3/H With A Pressure Of At Least 15 Meters And An Immersion Depth Of At Least 5 Meters; Cast Iron Body, Ip68 Protection, Built-In Thermal Protection And Float Switch. Inlet And Outlet Pipes Are Dn 25Mm. Gost 31840-2012. Passport/Operation Manual. Warranty Card (Warranty Period Of At Least 12 Months). Certificate.