Request For Quotation 01.Sanitary Products. (387).(Service 367)

Iae. Wafer Check Valve Made Of Stainless Steel Dn 50 Mm, Pn16 - Compact, Corrosion-Resistant, Designed For A Pressure Of At Least 16 Bar. Gost 33423-2015. Certificate., Iae. The Solenoid Valve Is Normally Closed. Designed For Remote Control (Opening And Shutting Off) Of Flows Of The Working Medium (Water), Dn-25 Mm, Maximum Pressure Not Less Than 1.0 Mpa, Stainless Steel Case, Voltage 24 V. Passport. Warranty Card. Warranty Period Is At Least 12 Months. Gost 22413-89. Certificate., Iae. Flange 25-16-01-2-В-St 10-Ii-Dв 34.5 Is A Flat Welded Steel Flange For Connecting Pipelines With A Nominal Diameter Of 25 Mm. Nominal Pressure Is Not Less Than 16 Kgf/Cm2. Flange Type - 01. Bit Row - 2. Design Of The Sealing Surface - B. Material - Not Lower Than Steel St10. Control Group - Ii. The Internal Diameter Of The Flange Is 34.5 Mm. Gost 33259-2015. Certificate., Iae. Clamp 2.1 43X12 N - A Metal Clamp For Fixing Pipes Of Type 2, Version 1, With A Diameter Of 43 Mm, A Width Of 12 Mm, Made Of Stainless Steel. Gost 28191-89. Certificate., Iae. Lock Nut Dn 25 Mm, Designed For Connecting Steel Pipes Used For Water Supply Systems. Made Of Stainless Steel. Gost 8968-75. Certificate., Iae. Flange 50-16-01-1-В-12Х18н10т-Db 59 Is A Flat Welded Steel Flange For Connecting Pipelines With A Nominal Diameter Of 50 Mm. Nominal Pressure Is Not Less Than 16 Kgf/Cm2. Flange Type - 01. Bit Row - 2. Design Of The Sealing Surface - B. Material - Stainless Steel 12Х18н10т. Control Group - Ii. The Internal Diameter Of The Flange Is 59 Mm. Gost 33259-2015. Certificate., Iae. Flange 40-16-01-1-В-12Х18н10т-Ii-Db 46 Is A Flat Welded Steel Flange For Connecting Pipelines With A Nominal Diameter Of 40 Mm. Nominal Pressure Is Not Less Than 16 Kgf/Cm2. Flange Type - 01. Bit Row - 2. Design Of The Sealing Surface - B. Material - Stainless Steel 12Х18н10т. Control Group - Ii. The Internal Diameter Of The Flange Is 46 Mm. Gost 33259-2015. Certificate., Iae. Sleeve With Thread Braid B (I)-6.3-32-43. Construction: Inner Rubber Layer, Several Layers Of Textile Frame And Outer Rubber Layer. Purpose: Supply Of Gasoline, Kerosene, Diesel Fuel And Petroleum-Based Mineral Oils. Inner Diameter 32 Mm. Outer Diameter 43 Mm. Pressure 6.3 Atm. Gost 18698-79. Certificate., Iae. Flange 25-16-01-1-B-12Х18н10т-Ii-Dв 33 Is A Flat Welded Steel Flange For Connecting Pipelines With A Nominal Diameter Of 25 Mm. Nominal Pressure Is Not Less Than 16 Kgf/Cm2. Flange Type - 01. Bit Row - 2. Design Of The Sealing Surface - B. Material - Stainless Steel 12Х18н10т. Control Group - Ii. The Internal Diameter Of The Flange Is 33 Mm. Gost 33259-2015. Certificate., Iae. Squeegee 25-Ts For Connecting Pipes With A Bore Diameter Of 25 Mm. Made Of Stainless Steel. Gost 8969-75. Certificate, Iae. Eccentric Transition, Stainless Steel 12Х18н10т For Connecting Pipes With A Diameter Of 57 Mm And 45 Mm Gost 17378-2001. Certificate., Iae. Wafer Check Valve Made Of Stainless Steel Dn-25 Mm, Pn16 - Compact, Corrosion-Resistant, Designed For A Pressure Of At Least 16 Bar. Gost 33423-2015. Certificate., Iae. The Transition Is Concentric, Stainless Steel 12Х18н10т For Connecting Pipes With A Diameter Of 57 Mm And 45 Mm Gost 17378-2001. Certificate., Iae. Coupling 25-C Is Designed For Connecting Pipes. Dn-25 Mm. Made Of Stainless Steel. Gost 8966-75. Certificate., Iae. Flanged Ball Valve Made Of Forged Stainless Steel, Full Bore, Dn50, Pn16, Designed For Temperatures Of At Least +200 Degrees Celsius. Gost 21345-2005. Certificate., Iae. Flanged Ball Valve Made Of Forged Stainless Steel, Full Bore, Dn25, Pn16, Designed For Temperatures Of At Least +200 Degrees Celsius. Gost 21345-2005. Certificate.