Request For Quotation Acquisition Of Machinery, Equipment, Tools, Production And Household Equipment

Type Two-Stroke, Carburetor, With Crank-Chamber Slot Blowing Rated Power, Hp 13.5 At 4000 Rpm; Cylinder Diameter, Mm 72; Piston Stroke, Mm 85; The Main Starting Method Is An Electric Starter; Backup Manual; Engine Weight, Kg 49; The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase. When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification, Designed To Power One Welding Station With Alternating Current With The Ability To Switch 220/380 V, Frequency 50 Hz, For Manual Arc Welding (Cutting Or Surfacing) With Coated Electrodes On Alternating Current Of Low-Carbon And Low-Alloy Steels. The Use Of Piece Welding Electrodes With A Diameter Of 2-5 Mm Of All Brands Is Provided. Number Of Phases 2 Or 3; Max Current Consumption 70 A; Mains Voltage 220, 380; Welding Control Type Is Mechanical; Rated Operating Voltage From 30 V; Rated Welding Current From 250 A; The Equipment Must Be Of The Maximum Configuration. The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase, Not Used, Not Restored After Repair And Not An Exhibition Copy. The Goods At The Time Of Delivery Must Be Confirmed By A Certificate Of Conformity Or Other Documents Confirming The Quality Of The Goods., Welding Gloves Are A Reliable Protective Tool That Provides Maximum Safety And Comfort During Welding Work. Type Of Gloves – Leather; Purpose – Welding; Color - Black The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase, Not Used, Not Restored After Repair And Not An Exhibition Copy. The Goods At The Time Of Delivery Must Be Confirmed By A Certificate Of Conformity Or Other Documents Confirming The Quality Of The Goods., Four-Pole Dc Motor. Power Kw, L/S 0.75X0.75; Voltage V, 12; The Year Of Manufacture Is Not Earlier Than The Year Of Purchase (New). When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification, To Supply Metered Portions Of Fuel Into The Cylinders At Strictly Defined Moments. Type Two Section Beam Type; Weight, Kg 13; Average Cyclic Fuel Supply At A Starting Rotation Speed Of 100 Rpm, Mm 180; The Year Of Manufacture Is Not Earlier Than The Year Of Purchase (New). When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification., The Compressor Is Designed To Pump Air Into Pneumatic Tools. This Unit Is Designed For Intensive Use: Its Design Uses A Belt Drive. The Cylinder Block, Which Is Equipped With Many Large Cooling Fins, Serves For Maximum Heat Transfer. This Compressor Is Actively Used In Car Repair Shops, Tire Shops, And Also In Construction. There Is No Power Plug. Benefits: Proven Reliability, High Quality Components. Minimum Maintenance Time, Three-Phase Motor, Three-Cylinder Piston Unit. The Pressure Switch Provides Constant Control Of Pressure In The Receiver And At The Outlet Of The Compressors. The Design Of The Compressor Group With Cooling Fins Ensures Optimal Thermal Operating Conditions. Built-In Thermal Protection Prevents Compressor Failure Due To Overheating. The Compressor Is Designed In Such A Way That The Main Part Of The Condensate Formed During Air Compression Is Released In The Receiver, Which Significantly Reduces The Moisture Content At The Compressor Outlet And Prevents The Formation Of Corrosion In The Pneumatic Lines. Contents: 1 Pc. Compressor, 1 Pc. Package. Characteristic: Mains Voltage: 380V; Maximum Power: 3 Kw; Inlet Flow: 580 L/Min; Output Capacity: 424 L/Min; Working Pressure: 10 Bar; Receiver Volume: 100L; Net Weight: 100 Kg; Dimensions Without Packaging: 1150×500×1000 Mm The Equipment Must Be Of The Maximum Configuration. The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase, Not Used, Not Restored After Repair And Not An Exhibition Copy. The Goods At The Time Of Delivery Must Be Confirmed By A Certificate Of Conformity Or Other Documents Confirming The Quality Of The Goods., Output Power Up To 400 W; Type: Dc/Dc Converter; Size, Mm 100*80*39; Input Voltage 12V; Output Current 20A; Output Voltage 24 V; Weight, G 500; Temperature Mode -30C To +80C. The Year Of Manufacture Is Not Earlier Than The Year Of Purchase (New). When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification., Weight, Kg 48; Cylinder Diameter, Mm 72.0; Piston Stroke In The Cylinder With The Main Connecting Rod, Mm 85.0; Engine Power Kw (Hp) At Rpm 3500 13.6 (10) The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase. When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification, The Machine Is Designed For Milling, Drilling At Various Angles Of Ferrous And Non-Ferrous Metals And Fissile Plastics. Powerful Commutator Motor Large Precision Cross Table Digital Indication Of Rotation Speed Digital Indication Of Drilling Depth Precise Movement Of The Spindle Quill The Ability To Tilt The Milling Head To The Right/Left Manufactured According To The Ce Standard Delivery Set Drill Chuck 3-16 Mm B16 With A Key Drill Chuck Mandrel Mt-2/B16-M10 Protective Screen With Limit Switch Remote Control Control With Digital Display, Maintenance Tool, Operating Instructions, Certificate Of Accuracy. Characteristic: Dimensions: 460×440×750Mm Spindle Taper: Mt-2 Max End Mill Diameter: 16Mm Max Drilling Diameter: 16 Mm Max.Face Milling Diameter: 50Mm Motor Power: 0.5 Kw Supply Voltage: 230V Table Size: 400×120Mm Spindle-Stand Distance: 175 Mm Spindle-Table Distance: 275 Mm T-Slot: 10 (3) Mm Milling Head Tilt Angle: -90˚ To +90˚ Spindle Quill Stroke: 50Mm Table Travel Along Y Axis: 160 Mm Table Travel Along X Axis: 260 Mm Vertical Spindle Speed: 50-2250 Rpm The Equipment Must Be Of The Maximum Configuration. The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase, Not Used, Not Restored After Repair And Not An Exhibition Copy. The Goods At The Time Of Delivery Must Be Confirmed By A Certificate Of Conformity Or Other Documents Confirming The Quality Of The Goods., Equipment For Abrasive Processing Of Various Materials. Type Of Equipment: Pressure Apparatus; Hopper Volume, L From 75; Productivity, M2/Hour 4-15; Air Consumption, M3/Min 3.5-6.2; Working Pressure, Bar 5-10; Weight, From Kg 85. Gost 12.2.003 The Equipment Must Be Of The Maximum Configuration. The Supplied Goods Must Be New, Not Earlier Than The Year Of Purchase. When Delivering The Goods, The Supplier Must Provide A Certificate Of Conformity Or A Certificate Stating That The Goods Are Not Subject To Mandatory Certification