Request For Quotation Components For Assembling A 5, 13, Micro 13 Inch Fpv Drone

Reinforced Frame, With A Set Of Mounting Accessories. Material: 3K Carbon Fiber; Frame Type: H-Shaped; Wheelbase: No Less Than 240 Mm; Propellers: 5; Frame Size: No Less Than 145×172 Mm; Weight: No Less Than 120 G; Bottom/Top Plate Thickness: No Less Than 2.5 Mm; Beam Thickness: No Less Than 5 Mm; Camera Installation Distance: No Less Than 19–20 Mm; Video Transmitter Compatibility: No Less Than 30.5 Mm / 20 Mm; Flight Controller Compatibility: Not Less Than 30.5 Mm / 20 Mm. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Agreement With The Customer Before Delivery. The Goods Must Meet Or Exceed The Standards Specified In The Technical Specifications. After Delivery Of The Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Report Until The Identified Defects Are Completely Eliminated., Drone Frame 13: Frame Type - Standard, Not Less Than Dimensions 489 × 489Mm, Not Less Than Base 593Mm, Weight About Not Less Than 728G (Without Printed Components), Weight Of Printed Components 10G, Carbon Material T300, Top Plate Not Less Than 2Mm, Not Less Than Middle Plate 4Mm, Bottom Plate Not Less Than 4Mm, Side Panels No Less Than 2 Mm, Beams No Less Than 10 Mm, No Reinforcing Rods, Distance Between Mounting Holes: Flying Tower No Less Than 30.5 × 30.5 Mm, No Less Than Video Transmission 20 × 20–30.5 × 30.5 Mm, No Less Than Motor Mount M3 × 19, M4 × 30 Mm, Camera Mount 19Mm, Internal Height 25Mm. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Agreement With The Customer Prior To Delivery. The Goods Must Meet Or Exceed The Standards Specified In The Technical Specifications. After Delivery Of The Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) For At Least 1. (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Certificate Until The Identified Defects Are Completely Eliminated.