Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz, The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyroscope: Icm42688-P Barometer: Splo6 On-Screen Menu：At7456e Black Box: Built-In 16M Bluetooth Setting: Not Supported Camera Dual Switching: Supported Dji Sky Terminal Interface: Supported Usb Port: Type-C Input Voltage: 3-6V Lithium Battery Bec Output: Max Power 5V 3A Max Power 10V 2A Number Of Serial Ports: 5 Constant Current: 60A * 4 Peak Current: 65A (10 Seconds) Electrical Feedback: Supported Current Sensor Control Value: 270 Electrical Setting Protocol: Dshot150 / 300 / 600 Installation Hole Distance: 30.5 X 30.5 Mm Size: 44.5 X 40.5 Mm Weight: 20.5 G The Supplier Undertakes To Provide Product Samples (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Propellers In Both Directions (Ccw And Cw). Included (6 Pieces). Two-Bladed Propeller, Model 3411, Counter-Clockwise Rotation (Ccw), Size 14X41 Cm. The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Spare Parts Kit: Propellers - 4 Pcs., Frame - 1 Pc., Motors 4 Pcs. Propellers-4 Pcs, Frame-1 Pcs Motors 4 Pcs Propeller 15 3‑Blade: Diameter 15 Inches, Pitch 7, Number Of Blades 3, Material: Fiberglass-Composite, Weight 63.9G, Hub Diameter 220Mm, Hub Thickness 12Mm. Motor: Model 4214 380Kv, Rated Voltage 8S Lipo (30.4V), Operating Range 3-12S, Kv Value 380 R/V, Maximum Power 1312 W, Maximum Continuous Current 41 A, No-Load Current 1.45 A (At 10 V), Maximum Thrust Up To 4510 G (With 15X7 Or 13X10 Propellers At 8S), Internal Winding Resistance 42 Mohm, 12 Slot / 14 Pole Configuration (12N14p), Motor Dimensions 51.2 × 49 Mm, M4 Base Mount (30 × 30 Mm), Reinforced Frame, With Mounting Accessories Kit Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); 647 Mm; Propellers: 15; Frame Size: 517 × 517 Mm; Top Plate Thickness: 2.0 Mm; Side Panel Thickness: 2.0 Mm; Camera Installation Distance: 19 Mm; 30.5 Mm / 20 Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25 Mm. 13-15″ Propellers Supported, 14 Awg Silicone Wiring 150 Mm Long, Motor Weight 195 G. For Product Approval Call: 8747 287 73 17 Supplier Undertakes Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchase Is Possible Only After Official Confirmation Of The Compliance Of The Characteristics Of The Samples With The Stated Requirements., Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz, The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyroscope: Icm42688-P Barometer: Splo6 On-Screen Menu：At7456e Black Box: Built-In 16M Bluetooth Setting: Not Supported Camera Dual Switching: Supported Dji Sky Terminal Interface: Supported Usb Port: Type-C Input Voltage: 3-6V Lithium Battery Bec Output: Max Power 5V 3A Max Power 10V 2A Number Of Serial Ports: 5 Constant Current: 60A * 4 Peak Current: 65A (10 Seconds) Electrical Feedback: Supported Current Sensor Control Value: 270 Electrical Setting Protocol: Dshot150 / 300 / 600 Distance Between Installation Holes: 30.5X30.5 Mm Size: 44.5X40.5 Mmweight: 20.5 Gto Coordinate The Product By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Digital Video Transmitter With Antenna. Video Transmitter (Vtx): Model Cy 5.8G 5W, Operating Frequency Range 4884-6055 Mhz, Number Of Channels 96, Output Power 25 Mw / 800 Mw / 2 W / 5 W / Bit Mode, Input Supply Voltage Dc 7-36 V (2-8S Lipo Batteries), Power Output 5 V / 600 Ma, Protocol Irc Tramp Control, Mmcx Antenna Connector, Overall Dimensions 53.5 × 32.5 × 15.5 Mm, Mounting Holes 20 × 20 Mm (M2), Weight 24.5 G (Without Antenna), Support For An Expanded Set Of Bands And Channels (A, B, E, F, R, L, U, O, H, X, Y, Z). Antenna 5.8Ghz: Operating Frequency 5.8Ghz, Impedance 50Ω, Standing Wave Ratio (V.Swr) Up To 1.92:1, Peak Gain 12Dbi, Omni Directional Polarization, Sma Connector, Antenna Material Cu/Abs, Operating Temperature -20...+70°C, Storage Temperature -20...+75°C, Cable Type Rg141.For Approval Of Goods By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz, The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyroscope: Icm42688-P Barometer: Splo6 On-Screen Menu：At7456e Black Box: Built-In 16M Bluetooth Setup: Not Supported For Product Approval By Phone Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Spare Parts Kit: Propellers - 4 Pcs., Frame - 1 Pc., Motors 4 Pcs. Designed To Create The Necessary Thrust To Lift An Fpv Drone Into The Air. Type: 51477 Number Of Blades: 3 Material: Pc Pitch: No Less Than 3.6 Inches Support Platter Diameter: No Less Than 129.3 Mm Center Thickness: No Less Than 6 Mm Central Hole Diameter: No Less Than 5 Mm/Popo Maximum Support Width: No Less Than 15.5 Mm Weight/G: No Less 4.12G Recommended Motor: 2206-2407 Minimummotor: Kv 1960, Rated Voltage 2-6S Lipo, Maximum Power 1197W Minimum, Open Circuit Current 1.2A Minimum, Peak Current 52.5A Minimum, Internal Resistance 57Mohm Minimum, 12 Slots (12N14p) Minimum, Shaft Made Of Tc4, Stator No Less Than 0.15 Mm, Bearings No Less Than 684 (4X9x4), Curved Magnets N55sh, Shaft Diameter No Less Than 4 Mm, Silicone Wiring No Less Than 20#, Length No Less Than 150 Mm, Main Body Weight No Less Than 32.8 G, Total Motor Weight No Less Than 36 G. Cv Value: 1960N Reinforced Frame, With A Set Of Installation Accessories. Material: 3K Carbon Fiber; Frame Type: H-Shaped; Wheelbase: No Less Than 240 Mm; Propellers: 5; Frame Size: No Less Than 145×172 Mm; Weight: No Less Than 120 G; Bottom/Top Plate Thickness: No Less Than 2.5 Mm; Beam Thickness: No Less Than 5 Mm; Camera Installation Distance: No Less Than 19–20 Mm; Video Transmitter Compatibility: No Less Than 30.5 Mm / 20 Mm; Flight Controller Compatibility: Not Less Than 30.5 Mm / 20 Mm. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Agreement With The Customer Before Delivery. The Goods Must Meet Or Exceed The Standards Specified In The Technical Specifications. After Delivery Of The Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies., Propellers In Both Directions (Ccw And Cw). Designed To Create The Necessary Thrust To Lift An Fpv Drone Into The Air. Type: 51477 Number Of Blades: No Less Than 3 Material: Pc Pitch: 3.6 Inches Platen Diameter: No Less Than 129.3 Mm Center Thickness: No Less Than 6 Mm Center Hole Diameter: No Less Than 5 Mm/Popo Maximum Support Width: No Less Than 15.5 Mm Weight/G: 4.12 G Recommended Motor: No Less Than 2206-2407. The Set Includes 4 Propellers. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Approval With The Customer Prior To Delivery. Goods Must Meet Or Exceed The Standards Specified In The Technical Specification. After Delivery Of Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For The Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Report Until The Identified Defects Are Completely Eliminated.
