Request For Quotation Purchase Of Spare Parts For Tractors

Bolt With Nut And Lock Washer, Wrench Size 24, Metal M24x80 With Hexagonal Head Together With Nuts And Washers With M24 Thread. For A 24X80 10.9 Bolt Without Coating, It Is Recommended To Use M24 Nuts Of Strength Class 10, Preferably Without Coating. High Strength Partial Thread 24X80 Mm 10.9 Bolts Are Made Of Carbon Steel. They Are Not Coated, So They Are Black. The Bolt Head Is Stamped With A Strength Class (10.9) And The Name Of The Manufacturer Can Be Applied. The Head Of The Bolt M24x80 Gost 7805-70 10.9 (Gost R Iso 4014-2014) With An Incomplete Thread Fits A Nozzle Or Wrench Size 36. The Thread Pitch Of The Bolt Is 3 Mm. The Height Of The Bolt Head Is 15 Mm., Nut With Bolts And Lock Washer Spanner Size 19 Metal Type Bolt Thread M19 Units In One Product 10 Product Weight, G 495 Length, Mm 50 Characteristics Standard Din 933 Standard Gost 7798-70 Fastener Strength Class 5.8 Thread Pitch, Mm 1.5 Head Hexagon Hexagonal Slot Coating Metal Fasteners Material Steel Color Black Metallic, Contents: - Metal Bolt M10 (Thread) X 50 Mm (Length) - 10 Pieces; - Metal Hex Nut Din 934 M10 - 10 Pieces; - Metallic Washer Din 125 M10, Trunnion (Axle) Of The Internal Shoe Of The Mower Ksf-2.1 (K-6036) Trunnion Of The Internal Shoe Of The Mower Ksf-2.1 (K-6036) A Structural Element Necessary For The Unit That Maintains Its Performance And Efficiency. Using The Axle And Pin, The Cutting Device Is Attached To The Module And Held In A Certain Position Relative To The Module By A Chain Rod Connected To Ridge Of The Inner Shoe. Made From Strong And Durable Material That Ensures Reliability And Durability Of Use. Type Attachment K-6036 Length, Cm 11 Width, Cm 2 Material Metal Color Dark Gray, Knife Head Guide Kgn-503 Spare Parts For Attachments Kgn-503 A Length, Cm 15.5 Width, Cm 3.7 Knife Head Guide Kgn-503A Is An Important Component For Segmental Mowers, Which Serves As A Guide Element In The Cutting Device Mechanism. The Main Purpose Of The Part Is To Ensure Correct Movement And Positioning Of The Knife In The Cutting Device Mowers Guide Plates (Front And Rear) Are Installed On The Inner Shoe And Serve For The Correct Operation Of The Mechanism. Installation Location: The Part Is Mounted On The Inner Shoe Of The Mower, Where It Ensures Reliable Fastening And Proper Operation Of The Blade Mechanism. A Connecting Rod Is Attached To The Knife Head, Which Ensures Efficient Operation Of The Entire Cutting Apparatus. Applicability: The Guide Is Intended For Use In The Ksf-2.1 Single-Beam Mower, Being An Important Part Of Its Cutting Mechanism., Knife Knb 4.1, Article Number Knb 4.1/Kznm 08.040 (Segment On Top) Type Spare Parts For Attachments Knb 4.1/Kznm 08.040 (Segment On Top) Length, Cm 226 Width, Cm 7, Sole Of The Inner Shoe K-50-14 Sole Of The Inner Shoe K-50-14 Rf Mowers Ksf, Kdp Steel, Thickness 5 Mm Cutting Apparatus For Combine Headers Material Steel, Cardan Joint Ksfaa-160 Cardan Shaft Joint Ii-160. Circle D-30 Mm (For Veneer) - Circle D-30 Mm (For Veneer). This Hinge Is Made Of Two Forks And A Cross K-016 (28*72.9). Used To Transmit Torque At Variable Angles. The Joint Is Used As Part Of Cardan Shafts For Agricultural Machinery And Tractors. Spare Parts For Al-160 Attachments 1 Type Of Spare Part Cardan Shaft Length, Cm 20 Width, Cm 10 Type Of Special Equipment Tractor Material Metal Color Green, Bearing Housing Ktp-6 Mower 208, Single Pin Of Mower Ksf-2.1 (S.O) Plate With Recess (K-5-1) Type Attachment K-5-1 Length, Cm 19.5 Width, Cm 8, , Коробка Привода Косилки Кдф-01.010 В Сборе (Литой Корпус) Коробка Привода Состоит Из Корпуса И Вала, Смонтированного На Двух Подшипниках, Шкива И Эксцентрика С Запрессованным В Него Пальцем. The Eccentric Serves To Convert The Rotational Motion Of The Shaft Into The Reciprocating Motion Of The Connecting Rod And To Balance The Inertial Forces Arising From The Mass Of The Connecting Rod And The Knife. Made From Strong And Durable Material That Ensures Reliability And Durability Of Use. Kdf-4.04.611 8734 Length, Cm 34 Width, Cm 18 Quantity, Pieces 1 Material Metal Color Gray, Friction Plate For Mower Kznm-08.405 Friction Plate For Mower Ksf-2.1 (405) (Kznm 08.405) Is A Structural Element Necessary For The Unit. Made From Strong And Durable Material That Ensures Reliability And Durability Of Use. The Knife Of The Cutting Apparatus Consists Of Segments, A Back And A Knife Head, Which Serves To Connect The Knife To The Connecting Rod. The Knife Moves In The Grooves Of The Fingers. Задней Частью Головки И Сегментов Он Лежит На Пластинах Трения, Передней (Режущей, Срезающей) Частью – На Противорежущей Пластине. Attachments Length, Cm 14 Width, Cm 5.5 Type Of Special Equipment Tractor Material Metal Color Gray, Roller Tension Mower Kdf-4.0 Assembled (Semi-Mounted) (Kdf-4.04.104) Roller Tension Mower Kdf-4.0 Assembled (Semi-Mounted) (Kdf-4.04.104) Is An Unloaded Pulley With A Movable Axis Of Rotation And Is Designed To Maintain Belt Tension, As Well As To Increase The Wrapping Angle Of The Small Pulley. A Structural Element Necessary For The Unit That Maintains Its Functionality And Efficiency. Made From Strong And Durable Material That Ensures Reliability And Durability Of Use. Kdf-4.04.104 Attachments Kdf-4.04.104 Additional Length, Cm 11 Width, Cm 9 Material Metal Color Metallic Gray, Plastic Bearing For Baler 16.01.002.(Set), Large Pulley Kznm-11.103 (2 Streams), Large, Left Thread Drive Pulley For Mower Ksf-2.1 (Cast) 2 Handles. (Left-Hand Thread) (Kznm 11.103) External Diameter: 230 Mm. Type Attachment Kznm-11.103 Length, Cm 30 Width, Cm 30 Type Of Special Equipment Tractor Material Steel Color Black, Bearing For Balers Prf-110,145,180,750 Pb16.01.002 (Set Of 10 Pieces, Polyamide) Bearing For Balers Prf-110,145,180,750 Pb16.01.002 Is A Set Of 10 Pieces Made Of Polyamide. This Material Is Characterized By High Strength And Wear Resistance, Which Ensures Long Bearing Life. The Product Is Installed On The Holder Of Prf-110, 145, 180, 750 Balers, Ensuring Reliable Fastening And Smooth Operation Of The Mechanism. The Bearing Dimensions Are 44X52 Mm, Height – 25 Mm, And Internal Diameter – 36 Mm. By Choosing A Bearing For Balers Prf-110,145,180,750 Pb16.01.002, You Get A Quality Product From A Trusted Manufacturer That Will Ensure Reliable Operation Of Your Equipment And Extend Its Service Life. The Bearing For Balers Prf-110,145,180,750 Pb16.01.002 Is A Set Of 6 Pieces Made Of Polyamide. This Material Is Characterized By High Strength And Wear Resistance, Which Ensures Long Bearing Life. The Product Is Installed On The Holder Of Prf-110, 145, 180, 750 Balers, Ensuring Reliable Fastening And Smooth Operation Of The Mechanism. The Dimensions Of The Bearing Are 44X52 Mm, Height – 25 Mm, And Internal Diameter – 36 Mm. When Choosing A Bearing For Balers Prf-110,145,180,750 Pb16.01.002, You Get A Quality Product From A Proven Brand Of Special Equipment Baler Installation Side Universal Length 52 Cm Width 44 Cm Detailed Equipment Bearing Pb16.01.002 6Pcs, Connecting Rod Head, Collapsible Mower Connecting Rod Head, Collapsible For 1 Bearing Of Segment Mower Ksf-2.1 Type Special Tool For Car Kdp 11-1 Material Metal Alloy Color Red