Equipment: 1) Stack: Flight Controller (Fc) And Engine Speed Controller (Esc) With Betaflight Firmware Version 4 And Higher - 1 Pc. 2) Motors Type 42Xx 52Xx For Batteries For 6S-8S - 4 Pcs. 3) Drone Frame Type True X Or Stretched X, Carbon Fiber Material (Carbon Fiber), Beam Thickness Of At Least 7 Mm, With The Necessary Fasteners - 1 Pc. 4) Capacitor - 1 Pc. 4) Capacitor - 1 Pc. 5) Camera: Digital Type O4 Pro - 1 Pc. 6) Video Transmitter (Vtx) With A Digital Antenna 5.8 Ghz Type O4 Pro Air Unit With A Power Of At Least 1.5 Watt - 1 Pc. 7) Receiver(Tx) Elrs Gemini With 2.4 Ghz/900 Mhz Antenna 1 Pc. 8) Gnss (Gps) Signal Receiver - 1 Pc. 9) Propellers 13 Inches - 4 Pcs. (2 Ccw And 2 Cw Directions). 10) Battery: Lithium Polymer, 6S-8S, At Least 10,000 Mah - 4 Pcs. The Use Of Uncertified Self-Assembled (Diy) Components Is Not Permitted. Electronic Devices (Fc, Esc, Tx, Vtx, Camera) Should Not Be Clones Of Original Products. The Potential Supplier, If Determined As The Winner, Is Obliged: After Concluding The Contract, Within Three Working Days, Provide The Customer With A Final Version Of The List Of Components For Approval. Tel. 8 708 839 75 61., Equipment: 1) Stack: Flight Controller (Fc) Type F7 (H7) Generation V4 With Betaflight Firmware Version 4 And Higher, Gyroscope Type Bmi270, Barometer, Support For 6S (22-25V) And Motor Speed Controller (Esc) For 6S Batteries. With Betaflight Firmware Version 4 And Higher - 1 Pc. 2) Motors Type 31Xx, 1200/1500Kv For Batteries Under 6S - 4 Pcs. 3) Drone Frame Type True X Or Stretched X, Carbon Fiber Material (Carbon Fiber), Beam Thickness Of At Least 7 Mm, With The Necessary Fasteners - 1 Pc. 4) Capacitor - 1 Pc. 5) Camera: Analogue At Least 1000Tvl, With High Light Sensitivity (Starlight Technology) 1/1.8 Inch Sensor - 1 Pc. 6) Video Transmitter (Vtx) With Antenna, Analog Power Not Less Than 1.5 Watt, Frequency 5.8 Ghz 1 Pc. 7) Receiver (Tx) Elrs Dual-Frequency (Parallel Reception) 2.4 Ghz/900 Mhz, With Antenna - 1 Pc. 8) Gnss (Gps) Signal Receiver - 1 Pc. 9) Propellers 10 Inches - 4 Pcs. (2 Ccw And 2 Cw Directions). 10) Battery: Lithium-Polymer, 6S, No Less Than 8000 Mah, Current Output No Less Than 40C, With Xt60 Type Connector - 4 Pcs. The Use Of Uncertified Self-Assembled (Diy) Components Is Not Permitted. Electronic Devices (Fc, Esc, Tx, Vtx, Analog Camera) Should Not Be Clones Of Original Products. The Potential Supplier, If Determined As The Winner, Is Obliged: After Concluding The Contract, Within Three Working Days, Provide The Customer With A Final Version Of The List Of Components For Approval. Tel. 8 708 839 75 61, Equipment: 1) Stack: Flight Controller (Fc) And Engine Speed Controller (Esc) F4 1S 5A Fc, Betaflight Firmware (At Least Version 4.3), With Built-In Video Transmitter (Digital And Analog). 2) Motors: For Batteries Under 1-2S - 4 Pcs. (2 Ccw And 2 Cw Directions). 3) Drone Frame, With Necessary Fasteners, - 1 Pc. 4) Canopy For The Camera - 1 Pc. 5) Camera: Analogue At Least 600Tvl With Video Transmitter And Antenna - 1 Pc. 6) Receiver (Tx) Elrs With 2.4 Ghz Antenna 1 Pc. 7) Propellers 75-80 Mm - 4 Pcs. (2 Ccw And 2 Cw Directions) 8) Battery: Lithium-Polymer, 1S, At Least 300 Mah - 2 Pcs. The Use Of Uncertified Self-Assembled (Diy) Components Is Not Permitted. Electronic Devices (Fc, Esc, Tx, Vtx, Analog Camera) Should Not Be Clones Of Original Products. The Potential Supplier, If Determined As The Winner, Is Obliged: After Concluding The Contract, Within Three Working Days, Provide The Customer With A Final Version Of The List Of Components For Approval. Tel. 8 708 839 75 61
