Propellers For 5 Inch Fpv Drone Type Propellers 3 Blades 5136 Material: Polycarbonate Color Black/Red 1 Set Contains 4 Propellers: 2 Cw Directions 2 Ccw Directions Tel 8 708 839 75 61, Equipment: 1) Stack: Flight Controller (Fc) Type F7 (H7) Generation V4 With Betaflight Firmware Version 4 And Higher, Gyroscope Type Bmi270, Barometer, Support For 6S (22-25V) And Motor Speed Controller (Esc) For 6S Batteries. With Betaflight Firmware Version 4 And Higher - 1 Pc. 2) Motors Type 28Xx, 1300Kv For Batteries Under 6S - 4 Pcs. 3) Drone Frame Type True X Or Stretched X, Carbon Fiber Material (Carbon Fiber), Beam Thickness Of At Least 7 Mm, With The Necessary Fasteners - 1 Pc. 4) Capacitor - 1 Pc. 5) Camera: Analogue At Least 1000Tvl, With High Light Sensitivity (Starlight Technology) 1/1.8 Inch Sensor - 1 Pc. 6) Video Transmitter (Vtx) With Antenna, Analog Power Not Less Than 1.5 Watt, Frequency 5.8 Ghz 1 Pc. 7) Receiver (Tx) Elrs Dual-Frequency (Parallel Reception) 2.4 Ghz/900 Mhz, With Antenna - 1 Pc. 10) Gnss (Gps) Signal Receiver - 1 Pc. 11) Propellers 7 Inches 4 Pcs. (2 Ccw And 2 Cw Directions) 12) Battery: Lithium-Polymer, 6S, No Less Than 4000 Mah, Current Output No Less Than 75C, With Xt60 Type Connector - 4 Pcs. The Use Of Uncertified Self-Assembled (Diy) Components Is Not Permitted. Electronic Devices (Fc, Esc, Tx, Vtx, Analog Camera) Should Not Be Clones Of Original Products. The Potential Supplier, If Determined As The Winner, Is Obliged: After Concluding The Contract, Within Three Working Days, Provide The Customer With A Final Version Of The List Of Components For Approval. Tel. 8 708 839 75 61, Equipment: 1) Stack: Flight Controller (Fc) Type F7 (H7) Generation V4 With Betaflight Firmware Version 4 And Higher, Gyroscope Type Bmi270, Barometer, Support For 6S (22-25V) And Motor Speed Controller (Esc) For 6S Batteries. With Betaflight Firmware Version 4 And Higher - 1 Pc. 2) Motors Type 22Xx Or 23Xx, At Least 1800Kv For Batteries Under 6S - 4 Pcs. 3) Drone Frame Type True X Or Stretched X, Carbon Fiber Material (Carbon Fiber), Beam Thickness Of At Least 5 Mm, With The Necessary Fasteners - 1 Pc. 4) Capacitor - 1 Pc. 5) Camera: Analogue At Least 1000Tvl, With High Light Sensitivity (Starlight Technology) 1/1.8 Inch Sensor - 1 Pc. 6) Video Transmitter (Vtx) With Antenna, Analog Power Not Less Than 1.5 Watt, Frequency 5.8 Ghz 1 Pc. 7) Receiver (Tx) Elrs Dual-Frequency (Parallel Reception) 2.4 Ghz/900 Mhz, With Antenna - 1 Pc. 8) Gnss (Gps) Signal Receiver - 1 Pc. 11) 5 Inch Propellers - 4 Pcs. (2 Ccw And 2 Cw Directions) 12) Battery: Lithium Polymer, 6S, 1500 Mah With Xt60 Type Connector - 4 Pcs. The Use Of Uncertified Self-Assembled (Diy) Components Is Not Permitted. Electronic Devices (Fc, Esc, Tx, Vtx, Analog Camera) Should Not Be Clones Of Original Products. The Potential Supplier, If Determined As The Winner, Is Obliged: After Concluding The Contract, Within Three Working Days, Provide The Customer With A Final Version Of The List Of Components For Approval. Tel. 8 708 839 75 61
