Tenders Are Invited For Machinery For Mining, Quarrying, Construction Equipment – Radlader Simmozheim

Machinery For Mining, Quarrying, Construction Equipment – Radlader Simmozheim. Rough Description Of The Delivery Item Wheel Loader With A Working Weight Of At Least 15 Mg And A Maximum Of 16.5 Mg, If Possible With Parallel Kinematics Or An Industrial Lifting Frame And A Performance In Hp Of At Least 180 To A Maximum Of 210. Awg Waste Management Landkreis Calw Gmbh Needs A Wheel Loader For Everyday Handling At The Simmozheim Waste Disposal Facility. The Wheel Loader Can Be Offered As A Leasing Option With The Following Parameters And Features. The Wheel Loader Is Equipped With Four Hydraulic Control Circuits. For Better Control During The Frequent Loading Activities Of Heavy Goods Over 4.00 Meters High, The Wheel Loader Is Preferably Offered With Parallel Kinematics, Although An Industrial Lifting Frame Is Also Considered Advantageous. The Combination Of Both Techniques Is Optimal. The Parallel Kinematics Have A Positive Effect When Loading, Sorting And Pushing The Storage Boxes For A More Precise View Of The Operating Personnel And Is Considered The Most Preferred Equipment In Terms Of Lifting Technology. In Our Opinion, The Industrial Lifting Frame Also Offers The Desired Performance For Loading Activities Over 4.00 Meters; No Additional Tearing Force Is Required, So It Can Be Viewed As More Advantageous Than Z-Kinematics For Use At Awg. The Mast Must Be Equipped With A Hydraulic Quick-Change System And A High-Tip Bucket With A Low Gripper. The Transferable Height Of The Universal/Heavy-Lift Bucket With Quick Coupler Must Be Higher Than 4.20 Meters. The Universal High Tipping Bucket Is Supplied With A Screw-On Knife And Multi-Coupler/Quick Coupler For Hydraulic Hoses. The Volume Of The High-Tip Bucket Should Be Between 2.5 M³ And 3.0 M³. Due To The Handling Of Different Types Of Construction Waste In A Small Space, A Tipping Load Of At Least 9,500 Kg Is Required. The Tires To Be Offered Must Withstand The Handling Of Waste And Recyclables And Should Therefore Have The L5 Classification. The Tires Must Also Be Fully Filled With Foam. Due To The Many Functions, It Should Be Controlled Via A Joystick. In Order To Minimize Strong Vibrations In The Drivers Cab, The Wheel Loader Must Be Equipped With Vibration Dampers For The So-Called Floating Position. This Has The Effect Of Reducing Vibration When Driving Both With A Loaded And Unloaded Bucket. The Drivers Cab Must Be Protected From Falling Materials Using High-Resistance Glass And Appropriate Safety Protective Film (Armored Glass Film Or Similar). An Optical And Acoustic Reversing Signal As Well As A Reversing Camera Must Be Part Of The Equipment. Since Longer Distances Have To Be Covered At The Simmozheim Disposal Facility, The Wheel Loader Must Be Equipped With At Least A 5-Speed Transmission With A Torque Converter Bridge Or A Comparable Continuously Variable Transmission. This Ensures Additional Fuel Savings. In Addition, It Then Calls