Tenders Are Invited For Angiography Room – Delivery, Installation And Commissioning Of An Angiography System And Provision Of Associated Services And Service Contract Services

Angiography Room – Delivery, Installation And Commissioning Of An Angiography System And Provision Of Associated Services And Service Contract Services. A Ceiling-Guided Angiography System Is Required For The Interventional Radiology Clinic At The Bürgerhospital Frankfurt. The Stand System Should Have The Following Features, Functions And Characteristics (Minimum Requirements): - Ceiling-Mounted Stand System With Motorized Movements (C-Arm / Detector) With Free And Reproducible Positioning - Collision Protection And Defined Parking Position(S) To Ensure Patient Transfer And Emergency Access The X-Ray Generator Should Have The Following Features, Functions And Characteristics (Minimum Requirements): - Microprocessor-Controlled High-Frequency Generator With Automatic Dose Rate Control For Fluoro And Acquisition - Generator Power At Least 100 Kw At 100 Kv - Voltage Range At Least 40-125 Kv - Max. Tube Current In Acquisition Mode Greater Than Or Equal To 1,000 Ma (At 100 Kv Or Equivalent) - Support For Pulsed Fluoroscopy - Imaging Modes: Fluoroscopy Including Lih, Fluoro-Store / Loop, Collimation And Measurement Functions; Dsa Including Roadmap / Overlay / Mask Management And Others (See Service Description) The X-Ray Source Should Have The Following Features, Functions And Properties (Minimum Requirements): - High-Performance Rotating Anode X-Ray Tube - Particularly Suitable For Interventional Procedures With Longer Fluoroscopy Times, Series, Dsa And 3D Rotation Angiography (3D Ra) - At Least Two Focus / Operating Modes (High-Resolution Focus And High-Performance Focus) Or One Equivalent Technology (E.G. Floating Focus) - Pulsed Fluoroscopy For Short Pulses / Steep Edges And Optimized Dose Management - Others (See Service Description) The Depth Stop Or Collimation Should Have The Following Features, Functions And Properties (Minimum Requirements): - Motorized Collimation For Field Limitation Including Display Of The Collimation Field In Real Time During Fluoroscopy And Acquisition - Rectangular Field Limitation - Automatic Or Semi-Automatic Collimation Functions For Dose Reduction (E.G. Adaptation To Detector Format / Fov / Zoom Including Storage In The Protocol/Acquisition Program The Detector Should Have The Following Features, Functions And Properties (Minimum Requirements): - Digital Flat Detector For Angiography / Intervention With Detector Technology Suitable For Dsa / 3D (E.G. A-Si With Csi Scintillator Or Equivalent With At Least 48 Cm Diagonal) - Collision Protection (Detector Protection Concept) - Rotation-Based 3D Imaging With Flat Detector Including 3D Reconstruction And Display (Viewer / Mpr) The Patient Table Should Have The Following Features, Functions And Properties (Minimum Requirements): - Table Suitable For Intervention With Motorized Height Adjustment, Longitudinal And Transverse Movement As Well As With Tilt Function, Which Enables Turning, Tilting And Automatic Position Control - Accessories For Resuscitation (Cpr) In Adults - Also Suitable For