Bids Are Invited For The Object Of This Tender Is The Selection Of The Most Advantageous Proposal For The Public Administration, Aiming To Record Prices For Future And Eventual Acquisition Of Parts, Components And Accessories Intended For Preventive And Corrective Maintenance Of Machines, Equipment And Agricultural Implements, To Meet The Needs Of The Municipal Secretariat Of Works And Urban Services Of The Municipality Of Mundo Novo/Ms, According To Specifications And Requirements Described In The Terms Of Reference - Annex I Of The Notice.

Disc Cut For Plow Harrow With External Diameter Of 26 Inches And Thickness Of 0.6 Mm With Hole For Shaft Of 1.5/8 Inches. Made Of Steel With High Carbon Content And Heat Treatment, Disc Cut Out For Leveling Harrow With An External Diameter Of 20 Inches And A Thickness Of 3.5 M With A Hole For A 1.1/4 Inch Shaft. Made With Steel With High Carbon Content And Heat Treatment, Round Shaft For Plow Harrow With A Thickness Of 1.5/8 And A Length Of 180Cm Accompanied By Two Hexagon Nuts Of 1.5/8 With Compatible Thread, Round Shaft For Plow Harrow With A Thickness Of 1.5/8 And A Length Of 185Cm Accompanied By Two Nuts 1.5/8 Hex Nuts With Thread Compatible With Shaft, Round Shaft For Plow Harrow With Thickness Of 1.5/8 And Length Of 210Cm Accompanied By Two 1.5/8 Hex Nuts With Thread Compatible With Shaft, 04/30/2026 - 10:32:21, 04/30/2026 - 10:32:22, 04/30/2026 - 10:32:23, Round Shaft For Leveling Harrow With A Thickness Of 1.1/4 And A Length Of 172 Cm, Accompanied By Two Hexagon Nuts Of 1/4 Inch Bsw Thread, Plowing Harrow Bearing 243 Mm With Hole For A Round Shaft Of 1.5/8 Inch And Grease Lubrication, 270 Mm Plow Harrow Bearing With Hole For 1.3/4 Inch Round Shaft And Grease Lubrication, 192 Mm Leveling Harrow Bearing With Hole For 1.1/4 Inch Round Shaft, Bearing Screw For Eccentric Square Head Plow Harrow. Measures 3/4X2.3/4 Complete With Flat Washer And Nut: Material 1020 Bichrome Carbon Steel (Yellow Zinc), Bearing Screw For Leveling Grid Measures 5/8X2.1/2 Complete With Flat Washer, Square Washer And Nut: Material 1020 Bichrome Carbon Steel (Yellow Zinc), Bearing 32210, Bearing 30207, Bearing 32209, Bearing 32208, Retainer 00556Gb, Smooth Disc 28 Inch Thickness 7.3Mm For 1-3/4 Round Shaft (Terracer Plow), Steel Bolt (8.8) 1X 7.5 With Lock Nut, Steel Bolt (8.8) 1-1/2X 8 With Locking Nut, Wheel Hub For Complete Plow Harrow, Galvanized Steel Pin 27Mm Flange, Wing Chain 50/1 Single Pitch 5/8, Wing Chain 60 Double Pitch 3/4, Bearing 6208 40X80x18, Bearing 6207, Bearing 6007, Bearing 6206, Bearing 6205, Bearing 6204, Belt For Limestone Distributor Baldan Dco6000 (Width 52Cm), 390 Mm Disc Spacer For Terrace (Axis 1.3/4), Hexagon Screw M12x60mm Steel 10.9 With Locking Nut, Hexagon Screw M8x25mm With Locking Nut, Rotor Cutting Knife Kit For Pinheiro Max Gold Premier Forage Harvester W/12 Units, Rotor Counter Knife For Forage Harvester Max Gold Premier, Rotor Cutting Knife Kit For Forage Harvester Jf-C120 W/ 12 Units, Counter Rotor Knife For Forage Harvester Jf-C120