Bids Are Invited For Acquisition Of Containers For Storage Of Urban Solid Waste Generated In The Municipality Of Pombal/Pb

European Type 240 Liter Plastic Mobile Container With Wheels And Lid. Acquisition Of Wooden Containers With A Capacity Of 240 Liters With Metal Axle And 2 Wheels. Minimum General Characteristics: 240 Liter European Type Plastic Mobile Container With Two Wheels - Handles: They Must Have Handles To Pull, Push And Maneuver The Container, Which Allow The Operator To Hold It Firmly With Both Hands. They Must Have A Minimum Height Of 800 Mm In An Inclined Position (Center Of Gravity Above The Wheel Axle). Corners: All Corners That Can Be Used For Maneuvering Must Be Rounded, So That No One Can Be Injured, With A Radius Of Less Than 1.4 Mm. - Mobile Plastic Container Of A Color To Be Defined By The Administration Of The Municipal Department Of Works, Transport And Infrastructure Of The Municipality - Dimensions: Must Be In Accordance With Table 3 Of Technical Standard Abnt Nbr 15.911-2. - Markings: The Body Of The Container Must Be Marked Permanently, Legibly And In A Visible Place With At Least The Following Information: - Manufacturer Identification; Month And Year Of Manufacture; Raw Material Identification Symbol According To Abnt Nbr 13230; - Number Of This Part Of The Standard; Nominal Volume Expressed In Liters; - Total Allowed Load Expressed In Kilograms; - Profile: Must Allow The Container To Be Immobilized In The Loading Position. - Wheels: Two With Internal Rims In Polypropylene And External Rims In Solid Rubber, Installed On A Solid Axle Made Of Resistant Metallic Material With Anti-Corrosion Treatment. - Surface: Must Not Show Damage, Cracks, Dents Or Large Marks. It Must Be Smooth And Free From Any Foreign Objects Or Imperfections, As Well As Sharp And Sharp Corners. Type: European - Volume: The Total Internal Space Of The Container When The Lid Is Closed Will Be 240 (Two Hundred And Forty) Liters., Waste Container - 4 Wheels Of 1000L Manufactured Using The Injection Method In High Density Polyethylene (Hdpe) - (Abnt Nbr 15911), With Lid Hinged To The Body, European Standard, Proving Compliance With Abnt Standard 15911-3/4 Through A Certificate Issued By An Ocp - Product Certificate Bodies And A Report On All Tests Included In Abnt Or With A Scope Accredited By Inmetro. It Must Be Manufactured With High-Density Polyethylene (Hdpe), Using An Injection Process And Resistant To The Action Of Ultraviolet Rays (Uv Protection), With A Smooth Surface And Free From Cracks, Imperfections, Sharp Corners And Sharp Edges. It Must Have A Drain Device For Draining Liquids, Have Resources To Mount The Caster Plate Without Drilling The Container And Devices That Enable Lifting (Tipping) Operations Efficiently And Safely. They Are: Side Receiver (Type A) Munhao: Pair Of Shafts Located On The Sides Of The Container; Front Receiver (Type B): Slots On The Front Of The Container To Fit The Combs. It Has 4 Castors With Steel Support With Anti-Corrosion Treatment, With Dimensions Of 200 Mm And 360 Degrees Of Rotation, Covered In Solid Rubber, Two Of Which Have An Individual Brake System. With Sticker For Awareness Message. Minimum Warranty Against Defects Or Manufacturing Faults Of 12 Months From The Date Of Actual Receipt. Dimensions: Capacity: 950 To 1100 Liters. Total Height: Maximum 1470 Mm Width With Trunnion: 1360 Mm To 1380 Mm Empty Container Weight, Minimum 45Kg Color: Blue 12 Month Warranty, Including Color., 04/30/2026 - 14:35:30