Request For Quotation Purchase Of Other Goods

Electric Stapler. Electric Construction Stapler For Securing Structures, Products, Materials During Construction, Repair Work, Furniture Manufacturing, Etc. The Stapler Is Made In A Convenient Ergonomic Case, Operates On A 220 V Mains Voltage And Is Characterized By High Performance. Thanks To The Versatility Of The Design, The Tool Can Be Used For Both Driving Nails And Staples. Nail Type - 48, Size - 15-16. Staple Type - 53, Staple Size - 8-16 Mm. The Magazine Holds 80 Pieces Of Nails And 100 Pieces Of Staples. The Impact Force Is Electronically Adjusted Depending On The Hardness Of The Material. The Handle Is Covered With Non-Slip Rubber Material For A Secure Grip. The Network Cable Is Protected From Low Temperatures, Which Keeps The Device In Working Condition For A Long Time. Electric, Voltage, V/Hz 220/50, Impact Frequency (1St/2Nd Speed), Beats/Min 20. Current Strength 5A, Type Of Staples 53, Type Of Nails 48., Pf-115 Enamel Is A Finely Dispersed Suspension Of Pigments And Fillers In Alkyd Varnish With The Addition Of Drier, Solvents And Rheological Additives. Scope Of Application Pf-115 Enamel Is Used For Painting Metal And Wooden Products And Objects Used In Atmospheric Conditions And Indoors. The Enamel Coating Is Weather-Resistant, Resistant To Water, Cleaning Solutions, And Industrial Oils. The Enamel Film Is Resistant To Temperature Changes From -50°C To +60°C. Conditions For Application: The Enamel Must Be Stirred Before Painting; If There Is A Film On The Surface, It Must Be Removed. Work Must Be Carried Out At Positive Temperatures. The Enamel Is Applied To The Primed Surface In 2 Layers. Drying Between Coats Is Carried Out Within 24 Hours. If Necessary, Dilution With A Solvent Of No More Than 10% Is Possible. White Spirit Is Usually Used. Complete Drying Of The Surface Is Achieved Within 24 Hours. Characteristics Of Enamel Pf-115. Conditional Viscosity According To A Vz-246 Viscometer With A Nozzle Diameter Of 4 Mm At A Temperature Of 20 ºс 60-120 S, Mass Fraction Of Non-Volatile Substances 49-70%, Drying Time To Degree 3 At A Temperature Of 20 ºс No More Than 24 Hours, Film Gloss Not Less Than 50%, Film Strength On Impact Not Less Than 40 Cm, Film Elasticity When Bending No More Than 1 Mm, Film Hardness 0.15 - 0.25 Arb. Units, Film Adhesion No More Than 1 Point, In Containers Of 5 Kg. Color Black.