Siz-3 Connecting Insulating Clamp For Wires Connecting Insulating Clamps Of The Ppe Type Are Designed For Insulation And Connection Into A Single Bundle Of Electrical Copper Wires And Cables. To Install The Clamp, During Electrical Installation It Is Screwed Onto The Previously Stripped And Connected Or Twisted Together Ends Of The Wires Several Turns Until Completely Fixed, While The Outer Part Of The Chip Completely Isolates The Twist. Screwing The Tips Is Done Clockwise Until It Stops. Plastic Ppe Can Be Used For Stranded And Single-Core Conductors With A Total Cross-Section Of 2.5-5.5 Mm². The Terminal Body Is Made Of Fireproof Pvc. A Conical Spring Made Of Galvanized Steel Is Mounted Inside, Which Ensures Reliable Capture And Retention Of Electrical Wires. Ppe 3 Creates A Strong And Durable Contact That Is Resistant To Vibration And Other Influences. The Insulating Material Prevents Possible Short Circuits And Damage. The Connectors Are Safe For Users And Equipment. Tdm Electrik Insulated Terminal Blocks Do Not Require The Use Of Special Professional Electrical Tools And Are Used For Electrical Installation Work In Both Domestic (Houses, Apartments) And Industrial Premises. The Convenience Of These Fastener Caps Lies In The Possibility Of Quick And Simple Installation Or Repair Of Electrical Wiring, As Well As Repeated Use Of The Unit Without Compromising The Integrity Of The Wiring. Maximum Voltage – 450V. Optimal Operating Temperature Is From -40 To +150°C. Degree Of Protection - Ip30, Distribution Box For Under-Plaster Installation 102X30 Box For Under-Plaster Installation, Connecting Insulating Clamp Siz-4 (1.5-9.5) Mm2 Connecting Insulating Clamp Siz-4 (1.5-9.5) Mm2 (100 Pieces Per ) Designed For Connecting Two Or More Cables/Wires With Copper Conductors With A Cross-Section From 0.5 To 10.0 Mm2 And Insulating The Connection. For Each Standard Size Of Ppe, The Manufacturer Indicates The Range (Minimum And Maximum) Of The Total Cross-Section Of The Connected Wires. This Type Of Clamp Can Be Used Repeatedly. These Connecting Insulating Clamps (Ppe) Are Used When Installing Electrical Wiring In Residential, Public And Industrial Buildings And Structures.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
