Tenders Are Invited For Stacking Machinery – Purchase Of A New Telescopic Loader Szhgt

Stacking Machinery – Purchase Of A New Telescopic Loader Szhgt. Sales Contract In The Subject Purchase Of A Telescopic Loader New Telescopic Loader 1 Pc Engine Power Minimum 125 Hp Min. 125 Hp Lifting Height Minimum 6.5 M Min. 6.5 M Maximum Load Capacity Min. 3500 Kg Min. 3500 Kg Load Capacity Max. When Extending Forward, At Least 1000 Kg Min. 1000 Kg Engine Emission Environmental Protection Standard: Stage V Necessary Hydraulic Pump With Load Sensor Minimum Power 140 (Litres/Minute) Min. 140 Liters/Minute Hydrodynamic Gearbox, 6 Forward And 3 Reverse Gears Necessary Change Of Direction With A Switch On The Joystick Necessary Heated, Air-Conditioned Cabin, With Front And Rear Wipers, Yellow Rotating Light And At Least 2 Work Lights At The Front And Back Necessary Pneumatic Drivers Seat Necessary Automatic Cooling Cleaning System Necessary Dashboard, Displays Minimum Requirement: Engine Speed, Coolant Temperature Gauge, Fuel Level Gauge, Machine Operation And Warning Lights Indicating Its Faults Required The Loader Must Have A Technical Test Before Placing It On The Market Required Equipped With An Automatic Central Greasing Device Required The Loader Must Be Equipped With An Additional Hydraulic Circuit - Solenoid Valve Gripper Adapter For The Side Mover Required Accessories, Adapters Fertilizer Bucket With Clamp: For Industrial Use Required Bucket Volume Minimum 1500 Liters Required Warranty Period 12 Months Required Pallet Fork: Fork Shank Length Minimum 1200 Mm Required Warranty Period Minimum 12 Months Required The Work Machine Can Only Be Of New Production, It Cannot Be A Demonstration Piece Or Used. Machine Accessories Must Be New. A Car Is Considered New If It Has Not Been Used As A Demonstration Or Trial Accessory, Neither In Hungary Nor Abroad, And Has Never Been Refurbished. Relevant Provisions Primarily, But Not Exclusively: A) Act V Of 2013 On The Civil Code, A) Köhém Decree 5/1990 (Iv.12) On The Technical Inspection Of Road Vehicles, B) 6/1990. (Iv.12.) Köhém Decree On The Technical Conditions For Putting Road Vehicles Into Service And Keeping Them In Service. All Vehicle Parts, Accessories And Features Subject To The Approval Obligation Set/Referenced In The Decree Must Be Approved In Accordance With The Un-Ece Regulations. C) Act I Of 1988 On Road Transport The Expectations Of The Contracting Authority Are Contained In The Technical Descriptions Specified In The Annex. An Offer Containing A Work Machine That Corresponds To The Detailed Values ​​Given In The Annex Or Has Equivalent Parameters Is Accepted As A Valid Offer (Government Decree 321/2015. (X. 30.) § 46 (3)), If The Deviation Does Not Mean A Change In The Use Of The Subject Of The Procedure, Or Usability. Establishing Equivalence Is The Competence Of The Contracting Authority. Detailed Description In The Attached Documents.