Tenders Are Invited For Design And Construction Of Lighting For Eight Passages For Pedestrians In The Mikołów Commune

1. The Subject Of The Order Is The Design And Execution Of Construction Works For The Task: Construction Of Lighting For Eight Pedestrian Crossings In Mikołów - Improving The Safety Of Vulnerable Road Users - Stage I - Ul. Colonel W. Kiełbasy/Ul. Priest Pb. W. Bandurskiego - 1 Pc., Ul. Konstytucji 3-Maja (Near The Swimming Pool) - 1 Pc., Ul. Młyńska / Ul. Priest Pb. W. Bandurskiego - 2 Pcs., Ul. Rymera – 1 Pc., Ul. Stolarska-1 Pc., Ul. Priest J. Szafranka - 1 Pc., Ul. Katowicka -1 Pc.2. The Task Includes The Preparation Of A Construction Design (Pzt And Architectural-Construction Design) For Pedestrian Crossing Lighting, Obtaining The Necessary Arrangements And All Administrative Permits And Consents Resulting From The Construction Law, As Well As The Development Of A Technical Design. Based On The Approved Design, Lighting Should Be Built For Eight Pedestrian Crossings In The Following Locations: 1) Ul. Colonel W. Kiełbasy At The Intersection With Ul. Priest Pb. W. Bandurskiego2) Ul. Konstytucji 3-Maja (Near The Pool),3) Ul. Młyńska (Next To The Frog) At The Intersection With Ul. Priest Pb. W. Bandurskiego, 4) Ul. Młyńska (Near Building No. 14), 5) Ul. Rymera At The Intersection With Ul. Wyzwolenia, 6) Ul. Stolarska At The Railway Crossing,7) Ul. Priest J. Szafranka At Ul. Karola Miarki,8) Ul. Katowicka (Near The Hospital)3. To Illuminate Pedestrian Crossings, Lighting Should Be Designed In Accordance With The Guidelines For The Design Of Pedestrian Infrastructure. Part 4: Design Of Lighting For Pedestrian Crossings (Wr-D-41-4). Make The Transitions In Lighting Class Pc2. Use Aluminum, Anodized Poles, Built On A Prefabricated Foundation; The Foundation Must Be Approved For Use By The Pole Manufacturer. Led Fixtures With Asymmetric Optics Dedicated To Illuminating Pedestrian Crossings And With A Color Temperature Of 5500-6000K Should Be Installed On The Poles. The Suspension Height And Fixture Power Should Be Selected Using Digital Modeling. Illuminance Calculations Should Meet The Requirements Of Glare Index Class D.6. Use Fuse Plates In All Poles, E.G. Tb Or Izk With A Do1 Fuse Insert. In The Construction Of The Lighting Cable Network, Use Yakxs Cables Laid Along Their Entire Length In A Protective Pipe Such As E.G. Dvk Ø50 In Blue. Secure Passages Under Roads And Entrances With Blue Srs110 Mm Pipe. 4. Passages Under Roads Should Be Made Using Directional Drilling Technology. 5. The Luminaires Used To Illuminate Pedestrian Crossings Will Be Powered By The Nearest Pole Of The Existing Street Lighting Installation. In Order To Connect The Crossing Lighting To The Street Lighting Owned By Tauron Nowe Technologie, It Is Necessary To Obtain The Technical Connection Conditions At The Design Development Stage. The Installation Supplying Power To Individual Poles Will Be Cable-Based. Cables Along Their Entire Length Should Be Routed In Protective Pipes. Fezn Tape Of Min. 4X25 Should Be Placed Along The Cable Routes To Ground The Poles Or Local Groundin