Request For Quotation Components For Assembling A 5, 13, Micro 13 Inch Fpv Drone

Digital Video Camera With Video Receiver. Digital) Video Transmitter With Antenna, Digital Video Transmitter With Antenna (Vtx), Power Of At Least 1.5 W, Frequency Range 5.8 Ghz, Support For Hd / 4K Video Stream With Low Latency, Compatible With Digital Fpv Systems, Interference Resistance, Overheat Protection, Power 5-12 V, Can Be Mounted To A Frame Or Suspension. To Coordinate The Product, Call 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Compile And Check The Technical Characteristics Of Several Copies. Wholesale Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Propellers In Both Directions (Ccw And Cw). Propeller 15 3‑Blade: Diameter 15‑Inches, Pitch 7, Number Of Blades 3, Material: Fiberglass-Composite, Weight 63.9G, Hub Diameter 220Mm, Hub Thickness 12Mm. To Coordinate The Product, Call: 8747 287 73 17 The Supplier Undertakes To Provide Product Samples (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies Only After Official Confirmation Of The Compliance Of The Characteristics Of The Samples With The Stated Requirements., Digital Video Camera With Video Receiver. At Least 1/1.3 Cmos Camera For Fpv And Professional Shooting: Support For 4K Video At Least 60 And 120 Fps, 155° Ultra-Wide-Angle Lens For Capturing Large Scenes, At Least 10-Bit D-Log M Color Mode For Accurate Color Correction, Graphics Transmission With Two Antennas And O4 Display For A Stable Signal At A Distance Of Up To 15 Km With Minimal Latency 15 Ms, Microsd Support Up To At Least 4 Gb, Weight Only At Least 32 G, Compact Size, Compatible With Adaptable Stands From At Least 3 And Above, Ideal For Dynamic Fpv Shooting And Professional Video Projects. Camera At Least 1/1.3-Inch Cmos Matrix At Least 4K/60 Fps, 4K/120 Fps C Weight: 32 Grams Dimensions: No Less Than 33.5 X 33.5 X 13 (Mm). The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Approval With The Customer Prior To Delivery. Goods Must Meet Or Exceed The Standards Specified In The Technical Specification. After Delivery Of Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For The Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Report Until The Identified Defects Are Completely Eliminated., Motor For Fpv Drone. Fpv Drone/Quadcopter Motor Model: 4214 380Kv Motor Size: 51.2 × 49Mm Wiring Type: 14# Silicone Wire 150Mm Length Kv (Revolutions Per Volt): 440 Rpm/V No-Load Current (At 5V/10V): 1.45A/10V Supported Battery: 3-12S Lipo, 8S Lipo Standard - 30.4V Maximum Continuous Current: 41A Maximum Continuous Power: 1312W Maximum Thrust: 4510G (8S / 1507G?), (8S / 1310G?) - Check For Context Configuration: 12N/14P Motor Resistance (Rm): 42Mohm Base Mount: M4 × 30 × 30 Mm Recommended Propellers: 13-15 Inches Weight: 195 G Purpose: Maneuverable Fpv Drones And High-Thrust Multicopters, Suitable For 8S Lip The Supplier Undertakes To Provide Product Samples (Spare Parts/Components) For Pre-Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Reinforced Frame, With A Set Of Mounting Accessories. Material: 3K Carbon Fiber; Frame Type: H-Shaped; Wheelbase: No Less Than 240 Mm; Propellers: 5; Frame Size: No Less Than 145×172 Mm; Weight: No Less Than 120 G; Bottom/Top Plate Thickness: No Less Than 2.5 Mm; Beam Thickness: No Less Than 5 Mm; Camera Installation Distance: No Less Than 19–20 Mm; Video Transmitter Compatibility: No Less Than 30.5 Mm / 20 Mm; Flight Controller Compatibility: Not Less Than 30.5 Mm / 20 Mm. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Agreement With The Customer Before Delivery. The Goods Must Meet Or Exceed The Standards Specified In The Technical Specifications. After Delivery Of The Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Report Until The Identified Defects Are Completely Eliminated., Analog Camera Camcorder With Video Receiver. Ratel Pro Camera: 1/1.8 Sensor, Horizontal Resolution 1500Tvl, Video Standard Ntsc & Pal (Switchable), Aspect Ratio 16:9 > 4:3 (Switchable), Super Wdr (Hdr), Minimum Illumination 0.00001Lux, 5Mp Lens, Electronic Shutter Pal: 1/50–100000; Ntsc: 1/60–100000, Viewing Angle 125°, Osd Menu, Interface Languages: English, Simplified/Traditional Chinese, Russian, Spanish, Italian, French, Polish, Portuguese, Japanese, Scene Mode: Auto/Color/B&W/Ext, Dimensions 19 × 19 Mm, Wide Power Supply Range Dc 4.5–27 V, Operating Temperature -20…+60°C, Humidity 20–80%, Weight 9.5 G. For Approval Of Goods By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchase Is Possible Only After Official Confirmation Of The Compliance Of The Characteristics Of The Samples With The Stated Requirements., Reinforced Frame, With A Set Of Mounting Accessories. Dimensions 35X35x9 Cm, The Frame Body Is Made In A Separate Design With The Ability To Install A Gps Module In The Upper Part, Sealed Top And Bottom Covers Provide Effective Protection From Dust And Moisture. Legs Folding Design, Dimensions 62×55 Cm, Pipe Diameter 2.5 Cm, Material: Aluminum Alloy, Silicone And Plastic. Speed Controller Dimensions 3.5×6×3 Cm, Dc-Dc Power Converter Model Cydc2403, Ultra-Wide Input Voltage Range 28–60 V, Stabilized Output 24 V, Input: Red Wire - Positive, Black - Negative; Output: Yellow Wire - Positive, Black - Negative. To Coordinate The Product By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Payload Multi-Charge Reset - 3 Pcs (Each: ~6 Channels, Dimensions ~250–350×150–250 Mm, Empty Weight ~1.5–3 Kg, With Ammunition ~3–6 Kg, Capacity ~6 Units Of ~250–350 G, Power Supply 12–24 V, Pwm Control, Servo/Solenoid Mechanism, Installation For Heavy Uavs With A Payload Of ~6–8 Kg, Reduction In Flight Time By ~20–40%), Cargo Container For Ammunition - 1 Pc (Load Capacity ~5–10 Kg, Durable Body, Quick-Release Mount, Possible Remote Release System Or Cable Unloading, Power Supply If There Is A Reset 12–24 V), Medical Container — 1 Pc (Load Capacity ~2–5 Kg, Sealed Case, Shock Absorption, Protection From Moisture And Dust, Parachute Drop Or Soft Landing Possible, Power Supply With A 12–24 V Reset System), Flight Controller Type F4 (F7) With Esc Speed Controller Of At Least 65A. Fpv Quadcopter Flight Controller Model: F405 V2 (Dji Support) Form Factor: Micro Stack Landing Dimensions: No Less Than 30.5 × 30.5 Mm (M3) Processor (Mcu): Stm32f405 Gyroscope / Accelerometer: Icm42688 Dji Support: Yes Supported Firmware: Betaflight F4, Inav Connection Interfaces: – Uart × 4 – I2c – Spi – Sbus/Ibus/Dsmx – Led/Buzzer Receiver Support: Ppm, Sbus, Ibus, Dsmx Osd Support: Yes (At7456e) Telemetry Support: Yes Power (Bec): Min 5V/3A, 9V/2A Input Voltage: Min 3-8S Lipo Black Box: 16Mb Barometer: Bosch Bmp280 (Germany) Gps: Yes Motor Channels: 8 Ch Serial Ports: 4 Ch Board Size (Pcb): 37 × 37 Mm Weight: 9 G Purpose: Flight Stabilization, Motor Control, Sensor Data Processing, Gps And Osd Support Electronic Speed Controller (Esc) For Fpv Drone Model / Controller: At32f421k8u7 Type Transistors: High Performance Mosfet (Metal Oxide Semiconductor Fet) Input Voltage: 3-8S Lipo Continuous Current: 80A Minimum Peak Current: 85A Minimum (Up To 10 Seconds) Current Feedback: Supported Built-In Ammeter: No Motor Control Protocol: Dshot150 / 300 / 600 Firmware Version: Am32 At32dev F421 1.99 Dimensions: No Less Than 41 × 21 × 11 Mm Weight: No Less Than 10.5 G Purpose: Control Of Speed Of Brushless Motors Of Fpv Drones, Stable Operation At High Currents, Support For Digital Dshot Protocols For Precise Control Of Motors. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Approval With The Customer Prior To Delivery. Goods Must Meet Or Exceed The Standards Specified In The Technical Specification., Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz, The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyroscope: Icm42688-P Barometer: Splo6 On-Screen Menu：At7456e Black Box: Built-In 16M Bluetooth Setting: Not Supported Camera Dual Switching: Supported Dji Sky Terminal Interface: Supported Usb Port: Type-C Input Voltage: 3-6V Lithium Battery Bec Output: Max Power 5V 3A Max Power 10V 2A Number Of Serial Ports: 5 Constant Current: 60A * 4 Peak Current: 65A (10 Seconds) Electrical Feedback: Supported Current Sensor Control Value: 270 Electrical Setting Protocol: Dshot150 / 300 / 600 Distance Between Installation Holes: 30.5X30.5 Mm Size: 44.5X40.5 Mmweight: 20.5 Gto Coordinate The Product By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Spare Parts Kit: Propellers - 4 Pcs., Frame - 1 Pc., Motors 4 Pcs. Propellers-4 Pcs, Frame-1 Pcs Motors 4 Pcs Propeller 15 3‑Blade: Diameter 15 Inches, Pitch 7, Number Of Blades 3, Material: Fiberglass-Composite, Weight 63.9G, Hub Diameter 220Mm, Hub Thickness 12Mm. Motor: Model 4214 380Kv, Rated Voltage 8S Lipo (30.4V), Operating Range 3-12S, Kv Value 380 R/V, Maximum Power 1312 W, Maximum Continuous Current 41 A, No-Load Current 1.45 A (At 10 V), Maximum Thrust Up To 4510 G (With 15X7 Or 13X10 Propellers At 8S), Internal Winding Resistance 42 Mohm, 12 Slot / 14 Pole Configuration (12N14p), Motor Dimensions 51.2 × 49 Mm, M4 Base Mount (30 × 30 Mm), Reinforced Frame, With Mounting Accessories Kit Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); 647 Mm; Propellers: 15; Frame Size: 517 × 517 Mm; Top Plate Thickness: 2.0 Mm; Side Panel Thickness: 2.0 Mm; Camera Installation Distance: 19 Mm; 30.5 Mm / 20 Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25 Mm. 13-15″ Propellers Supported, 14 Awg Silicone Wiring 150 Mm Long, Motor Weight 195 G. For Product Approval Call: 8747 287 73 17 Supplier Undertakes Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchase Is Possible Only After Official Confirmation Of The Compliance Of The Characteristics Of The Samples With The Stated Requirements., Reinforced Frame, With A Set Of Mounting Accessories. Reinforced Frame, With A Set Of Mounting Accessories. Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); Wheelbase: 647 Mm; Propellers: 15″; Frame Size: 517 × 517 Mm; Weight: 754 G; Top Plate Thickness: 2.0Mm; Middle And Bottom Plate Thickness: 4.0Mm; Side Panel Thickness: 2.0 Mm; Beam Thickness: 10 Mm; Camera Installation Distance: 19Mm; Vtx Compatibility: 30.5Mm/20Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25 Mm. To Coordinate The Product, Call: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Digital Video Transmitter With Antenna. Video Transmitter (Vtx): Model Cy 5.8G 5W, Operating Frequency Range 4884-6055 Mhz, Number Of Channels 96, Output Power 25 Mw / 800 Mw / 2 W / 5 W / Bit Mode, Input Supply Voltage Dc 7-36 V (2-8S Lipo Batteries), Power Output 5 V / 600 Ma, Protocol Irc Tramp Control, Mmcx Antenna Connector, Overall Dimensions 53.5 × 32.5 × 15.5 Mm, Mounting Holes 20 × 20 Mm (M2), Weight 24.5 G (Without Antenna), Support For An Expanded Set Of Bands And Channels (A, B, E, F, R, L, U, O, H, X, Y, Z). Antenna 5.8Ghz: Operating Frequency 5.8Ghz, Impedance 50Ω, Standing Wave Ratio (V.Swr) Up To 1.92:1, Peak Gain 12Dbi, Omni Directional Polarization, Sma Connector, Antenna Material Cu/Abs, Operating Temperature -20...+70°C, Storage Temperature -20...+75°C, Cable Type Rg141.For Approval Of Goods By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Rechargeable Batteries. Rechargeable Battery 14S 30000Mah ×2, High Capacity For Long Flight, Provides Stable Power To Drones And Other High-Voltage Platforms, Reliable Protection Against Overheating And Overdischarge, Suitable For Professional Use And Heavy Loads., Voltage 29.6V, Discharge Current 30C, Dimensions 160 × 50 × 73Mm, Full Charging Voltage 35.2V, Weight About 1250G, Applicable For 13‑ And 15‑Inch Quadcopters And Tracked/Wheeled Vehicles. To Coordinate The Product, Call: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz, The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyroscope: Icm42688-P Barometer: Splo6 On-Screen Menu：At7456e Black Box: Built-In 16M Bluetooth Setup: Not Supported For Product Approval By Phone Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Flight Controller Type F405 8S With Esc Speed Controller. Fiber Optic Flight Controller: F405 V2 With Dji Support, Stm32f405 Microcontroller, Icm42688 Gyro, Dji Air Unit Support, 3-8S Lipo Input Voltage, Built-In 9V/2A And 5V/3A Bec, Support Ppm/Ibus/Sbus/Dsmx Receivers, Built-In Blackbox Memory 16 Mb, Bosch Bmp280 Barometer (Germany), Gps Support, Control Of Up To 8 Motors, 4 Serial Ports (Uart), Betaflight F4 And Inav Firmware, Led And Buzzer Support, Built-In Betaflight Osd On At7456e Chip, Board Size 37 × 37 Mm, M3 Mounting Holes 30.5 × 30.5 Mm, Weight 9 D.Electronic Speed Controller, At32f421k8u7 Controller, High-Performance Mosfet, Input Voltage 3-8S Lipo, Continuous Current 80A, Peak Current 85A (10 Seconds), Support Electrical Feedback, Dshot150/300/600 Configuration Protocol, Firmware Version Am32 At32dev F421 1.99, Overall Dimensions 41 × 21 × 11 Mm, Weight 10.5 G. For Approval Of Goods By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Receiver Type Elrs Or Tbs Crossfire, Frequency 2.4 Ghz Or 868/915 Mhz. The Radio Receiver Is Designed To Receive Control Signals From The Ground Control Station (Control Panel). Connection Interface: Uart (Rx) Main Controller: Stm32f722 Gyro: Icm42688-P Barometer: Splo6 Osd：At7456e Black Box: Built-In 16M Bluetooth Setting: Not Supported Dual Camera Switching: Supported Dji Sky Terminal Interface: Supported Usb Port: Type-C Input Voltage: Lithium Battery 3-6V Bec Output: Max Power 5V 3A Max Power 10V 2A Number Of Serial Ports: 5 Constant Current: 60A * 4 Peak Current: 65A (10 Seconds) Electrical Feedback: Supported Current Sensor Control Value: 270 Electrical Setting Protocol: Dshot150/300/ 600 Distance Between Installation Holes: 30.5X30.5 Mm Dimensions: 44.5X40.5 Mm Weight: 20.5 G. The Supplier Supplies Components (Spare Parts) In Accordance With The Technical Specifications Agreed With The Customer. All Supplied Components Are Subject To Prior Approval With The Customer Prior To Delivery. Goods Must Meet Or Exceed The Standards Specified In The Technical Specification. After Delivery Of Components, The Customer Assembles The Product(S) And Conducts Trial Tests (Test Flight) Of At Least 1 (One) And No More Than 2 (Two) Copies. Final Acceptance Of The Work Results Is Carried Out By The Customer Only After Successful Completion Of Assembly And Trial Tests, Following Which The Parties Sign An Acceptance Certificate For The Goods (Assembly And Test Certificate). If Deficiencies Are Identified During The Assembly Or Testing Process, The Customer Has The Right Not To Sign The Report Until The Identified Defects Are Completely Eliminated., Motors Of Type 31Xx And Their Analogues, Voltage 6S. Motor: Kv 1960, Rated Voltage 2-6S Lipo, Max Power 1197W, No Load Current 1.2A, Peak Current 52.5A, Internal Resistance 57Mohm, 12 Slots (12N14p), Tc4 Shaft, 0.15Mm Stator, 684 Bearings (4X9x4), Curved Magnets N55sh, Shaft Diameter 4 Mm, Silicone Wiring 20#, Length 150 Mm, Main Body Weight 32.8 G, Total Motor Weight 36 G. Cv Value: 1960 The Supplier Undertakes To Provide Product Samples (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Navigation Receiver Of Satellite Signals With Compass. Gnss Module With Compass: Gnss U-Blox Sam-M10 (Supports Gps, Glonass, Galileo And Beidou), Magnetic Compass Qmc5883l, Patch Antenna 15 × 15 × 4Mm, Input Voltage Range 4–9V (5V Via Pin/Pad), Current Consumption 13Ma, Uart Speed Default 9600Bps, Operating Temperature -20...+80°C, Interfaces: Uart (Tx, Rx) For Sam-M10q-00B, I2c (Da, Cl) For Qmc5883l, Jst-Gh-6P Connector (M06b-Ghs-Tb, Pitch 1.27Mm), Gnss Pps Led (Green, Constantly On After Switching On, Blinking 1Hz When Receiving 3D Fix), Protocols: Ubx (U-Blox) 5Hz @ Gps+Gal+Bds B1c+Glo Or Nmea 1Hz, Dimensions 20 × 20 × 12.4 Mm, Weight 8 G. For Product Approval By Number: 8747 287 73 17 The Supplier Undertakes To Provide Product Samples (Spare Parts/Components) For Preliminary Assembly And Testing. The Customer Has The Right To Assemble And Check The Technical Characteristics Of Several Copies. Bulk Purchases Are Possible Only After Official Confirmation Of Compliance Of The Characteristics Of The Samples With The Stated Requirements, Spare Parts Kit: Propellers - 4 Pcs., Frame - 1 Pc., Motors 4 Pcs. Reinforced Frame, With A Set Of Mounting Accessories. Material: T300 Carbon Fiber; Frame Type: 15-Inch (Quadcopter); Wheelbase: 647 Mm; Propellers: 15″; Frame Size: 517 × 517 Mm; Weight: 754 G; Top Plate Thickness: 2.0Mm; Middle And Bottom Plate Thickness: 4.0Mm; Side Panel Thickness: 2.0 Mm; Beam Thickness: 10 Mm; Camera Installation Distance: 19Mm; Vtx Compatibility: 30.5Mm/20Mm; Flight Controller Compatibility: 30.5 Mm; Internal Frame Height: 25Mm.Motor: Model 4214 380Kv, Rated Voltage 8S Lipo (30.4V), Operating Range 3-12S, Kv Value 380Rpm, Maximum Power 1312W, Maximum Continuous Current 41A, No-Load Current 1.45A (At 10V), Maximum Thrust Up To 4510G (With 15X7 Or 13X10 Propellers At 8S), 42Mohm Internal Winding Resistance, 12 Slot/14 Pole Configuration (12N14p), Motor Dimensions 51.2X49mm, M4 Base Mount (30X30mm), Supported 13-15 Propellers, Silicone Wiring 14 Awg 150 Mm Long, Motor Weight 195 G. Motor: Model 4214 380Kv, 8S Lipo Rated Voltage (30.4 V), Operating Range 3-12S, Kv Value 380 Rpm, Maximum Power 1312 W, Maximum Continuous Current 41 A, No-Load Current 1.45 A (At 10 V), Maximum Thrust Up To 4510 G (With 15X7 Or 13X10 Propellers At 8S), Internal Winding Resistance 42 Mohm, 12 Slot / 14 Pole Configuration (12N14p), Motor Dimensions 51.2 × 49 Mm, M4 Base Mount (30 × 30 Mm), Supported Propellers For Approval Of Goods By Number: 8747 287 73 17 The Supplier Undertakes To Provide Samples Of Products (Spare Parts/Components) For Preliminary Assembly And Testing.