Gloves For Hand Protection, Latex, Dielectric. . Gloves Must Be Five-Fingered, Seamless, With Smoothly Polished Surfaces With A Cuff, With A Roller, Designed To Work With Electrical Installations With Voltages Up To 1000 Volts. 2. Glove Length: 360Mm. 3. Glove Color: Yellow. Material Requirements 4. Glove Upper Material: Natural Rubber. 5. Gloves Must Meet The Following Technical Specifications: 1) Resistance To Acids - Category A; 2) Resistance To Ozone - Category Z; 3) Resistance To Very Low Temperatures - Category C. Gost 13385-78. (Safety And Health Safety), Protective Against Reagents (Chlorine, Sodium Hypochloride) Of The Uvex Brand, Closed With An Ultravision Lens: • Ca, Antifog, Transparent, 2-1,-2, Transparent Obturator, Foam Seal. Gost 12.4.253-2013. (Safety And Health Safety), The Shield Reliably Protects The Face And Eyes From Exposure To Arc Radiation During Electric Welding, Hot Metal, Sparks And Splashes. Material: Polypropylene. The Electric Welders Shield For Welding Must Have A Folding Screen. The Helmets Lightweight Polypropylene Body Provides Full Face Protection, Allowing The Helmet To Be Used In Any Welding Position. The Headband Is Adjustable In 5 Positions, The Mask Comes Complete With A Protective Lens 90X110 Made Of Mineral Glass With A Degree Of Darkening. Full Face Protection Provides Protection To The Eyes, Chin, Neck, Ears And Head, Allowing Welding In A Variety Of Positions. The Dimensions And Configuration Of Shields And Masks, In Particular The Height, Width And Depth Of The Mask, Must Be At Least 300, 220 And 150 Mm, Respectively. The Depth Of The Upper And Lower Canopies From The Front Wall Must Be At Least 50 Mm. The Weight Of The Mask Should Not Exceed 600 Grams. Shields And Welding Helmets Are Equipped With Protective Light Filters, Which Are Covered On The Outside With Clear Glass To Protect The Light Filters From Metal Splashes. The Inside Of The Light Filter Is Covered With Colorless, Unbreakable Glass To Protect The Welder’S Eyes And Face From Damage From Fragments In The Event Of Accidental Damage To The Cover Glass And The Light Filter. If The Cover Glass Becomes Dirty, Replace It With A New One. Basic Requirements: • Made Of Fireproof, Heat-Resistant And Impact-Resistant Material; • Adjustable Fastening To The Helmet; • Ergonomic Shield Of Minimal Weight; • Side Channels For Removing Smoke Generated During Welding; • Temperature Range Of Application From -40Ос To +70Ос; • Light Filters Creating The Most Comfortable Conditions For The Eyes. Gost 12.4.254-2013 (Safety Safety And Health Safety), Welder Suit (Summer). Technical Description: Jacket: With Hidden Fastening With Loops And Buttons, With Side Pockets. Pockets Should Have Flaps In The Side Seams, Hidden. The Sleeves Are Long. All Seams Are Stitched With Double Finishing Stitch Using Threads Made From Aramid Fibers. Collar: Turn-Down Trousers: The Main Seams Of The Trousers Are Made Using Threads Made From Aramid Fibers. The Trousers Are Fastened With Buttons, One On The Belt, Three On The Codpiece. There Are Six Belt Loops Along The Belt, Fastening Straps With Frames. Knee Pads With Pockets For Shock-Absorbing Pads. Material: Cotton – 100%, 490 G/M², Mvo, K50, Fire-Resistant Technology “Proban” Color: Black Or Gray. Additional Requirements: Textile And Plastic Haberdashery Products, Buttons, Zippers And Accessories Should Be Placed In Areas Of The Product Inaccessible To Direct Splashes Of Molten Metal. Gost 12.4.250-2013 (Safety Safety And Health Safety), Dielectric Mats Act As A Protective Agent In Closed Electrical Installations With Voltages Over 1000V (Except For Particularly Damp Rooms) And In Open Electrical Installations In Dry Weather. The Dielectric Mat Must Withstand A Voltage Of 20,000 V With A Frequency Of 50 Hz. Carpets Should Be: Sheets. They Are A Flat Rubber Plate Of Varying Thickness With Equal Sides And Are Made With A Corrugated Surface. Dielectric Carpets Are Used As A Specialized Protective Electrical Insulating Material That Has Passed Quality Control Inspection. Size – 750X750x50mm. Color Black. The Product Must Have A Certificate Or Declaration Of Conformity With A Test Report, Which Must Be Provided Upon Delivery Of The Product. Gost 4997-75 (Safety Safety And Health Safety)
