Tenders Are Invited For Construction Of A Skate Park With Accompanying Infrastructure At The Primary School In Księżpol

1.The Subject Of The Order Entitled Construction Of A Skate Park With Accompanying Infrastructure At The Primary School In Księżpol Is The Construction Of A Skate Park In Modular-Composite Technology With Accompanying Infrastructure On The Premises Of The Primary School. Jana Pawła Ii In Księżpol, Plot No. 207/15. The Investment Includes The Delivery And Assembly Of Devices And Equipment For The Skate Park And Complementary Elements, As Well As The Construction Of Paved Communication And Auxiliary Surfaces, Including The Skate Parks Running Board Made Of Poured Concrete, And Tidying Up The Area With Sowing Grass And Planting Trees. 1) The Scope Of The Investment Includes In Particular: A) Construction Of The Skate Park - Delivery And Installation Of Equipment; Construction Of A Driving Surface From A Poured Concrete Slab: •Skate Park Driving Slab: Poured Concrete Mechanically Troweled. Reinforced Concrete Slab 15 Cm Made Of C35/45, Hydrotechnical Concrete W8, Frost Resistance F150, Reinforced. The Board Has Expansion Joints At Least 1/3 Of Its Thickness, In Fields Of Max. 5X5m. One-Sided Decline 1-1.5%. Area 656.20 M2. Designed Layer System, Including The Substructure:15 Cm - Concrete Surface, Reinforced In Accordance With The Above-Mentioned Description,0.15 Mm - Slip Layer Made Of Pe Foil, 2 Layers,12 Cm - Lean Concrete Rm= 9 Mpa According To Pn-S-96013:1997,30 Cm - Frost-Protective Layer Of Aggregate 0/2 F/6 Pn-En 13242+A1:2010 Modulus Of Secondary Deformation E/2≥50 Mpa - Ground Surface•Skate Park Facilities In Lightweight Construction. Wooden Supporting Structure - Due To The Lower Noise Level Than When Using A Steel Structure. Driving Surface Made Of Hpl Or Composite Mats. A Tolerance Of Device Dimensions Of +/- 6% Is Allowed, While Maintaining The Applicable Safety Zones. - Beginners Section Small Bank/Low Bank [1], Pronunciation: 300X366x60, Box + Manual Pad [2], Dimensions 400X200x20/40, Flatrail [3], Dimensions 400X25, Small Qarterpipe/Quarter Low [4], Dimensions 280X366x60, Open Square Without Driving Training Equipment [8], Dimensions Approx. 1100X900,- Intermediate Section Large Bank Connected To Quarterpipe/High Bank + High Quarter [5], Dimensions 390X600x150, Extended Funbox With Handrails, Pyramid And Box/ Funbox + Pyramid + Wall 3/3 + Platform + Break + 2X Handrail [6], Dimensions 400X800x40/70, Large Quarterpipe [7], Dimensions 380X600x150, B) Installation Of Additional Equipment, I.E. • Board With Regulations/Instructions For Use Of The Skate Park [T] • Arched Benches [Ł1] • Straight Benches [Ł2] • Waste Bins [K] • Bicycle Racks [St] U With Dimensions Above The Ground 100X80 Cm. C) Installation Of A Water Fountain With Construction Of A Section Of Internal Water Installation In The Ground To Supplying The Spring. Spa With 3 Bowls Installed At Different Heights. D) Construction Of Paved Communication And Auxiliary Surfaces. • 2 M Wide Sidewalk Connecting The Designed Skate Park With Gates In The Areas Fence And With